Selected parameters SYSTEM System HOUSING Rectangular SENSING FUNCTION charge or discarge CONNECTION Plug and socket OUTPUT Relay SPDT MATERIAL Plastic Others HOUSING 80 x 75 x 35 mm SENSING FUNCTION Open collector input NPN MATERIAL NORYL
Proximity Sensors Capacitive Amplifier, Capacitive, Optical TypeSV 190 (Charging/Discharging) • Level control relay • Max.-min. control of charging/discharging • For use with refractive optical sensors or capacitive sensors • Controls liquid/granulate presence or absence with one sensor, or liquid/granulate level within max./min. limits with two sensors • Normal or inverted function selectable • 10 A SPDT output relay • LED-indication: relay ON • AC or DC power supply Product DescriptionOrdering Key SV 190 230 Level control relay for trans- parent liquids or granulates which can control one or two levels of charging or dis- charging. For use with opti- cal sensors (VP..) or capaci- tive sensors (DR.. orEC..). Open collector NPN-types only. Type Power supply TypeSelection PlugOutputSupply: 24 VACSupply: 115 VAC Supply: 230 VACSupply: 24 VDC CircularSPDTSV 190 024 SV 190 115 SV 190 230SV 190 724 InputSpecifications Sensor supply through pins 7 and 9 (+)12 VDC, stabilized max. 60 mA Short-circuit protection Yes Sensor input One levelPin 5 Two levels Pin 5 and 6 Operating frequencyMax. 5 Hz. Input resistance25 kW Cable resistance Max. 100 W General Specifications Time delay before availability0.5 s Indication for Output ONLED, red Environment Degree of protection IP 20 B Pollution degree 3 (IEC 60664) Operating temperature -20 to +50ºC (-4 to +122ºF) Storage temperature-50 to +85ºC (-58 to +185ºF) Approvals UL, CSA CE-markingYes Supply Specifications Power supply AC-types Overvoltage cat. II (IEC 60664) Rated operational voltage through pin 2 & 10230 230 VAC ± 15% 115 115 VAC ± 15% 024 24 VAC ± 15% Rated insulation voltage ³ 2,0 kVAC (rms) Rated impulse withstand voltage4 kV (1,2/50 µs) (line/neutral) Power supply DC-types Installation cat. II (IEC 60664) Rated operational voltage724 24 VDC ±15% (pin 2 pos.) Rated insulation voltage None Rated transient protection volt. 800 V (1.2/50 µs) Specifications are subject to change without notice (12.06.03) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.