Selected parameters SYSTEM Retro-reflective, Transparent HOUSING rectangular SENSING RANGE 1 ... 5 m CONNECTION M12 plug DC OUTPUT DC PNP MATERIAL Plastic Others SENSING RANGE 2 m HOUSING 30 x 20 x 10,8 mm MATERIAL ABS ADDITIONAL Test input
Photoelectrics Retro-reflective for Transparent Objects Type PD30CNG02....MU • Miniature sensor range • Range: 2 m, with reflector • Sensitivity adjustment by Teach-In programming • Modulated, red light 617 nm • Supply voltage: 10 to 30 VDC • Output: 100 mA, NPN or PNP preset • Make and break switching function programmable • LED indication for output, stability and power ON • Protection: reverse polarity, short circuit and transients • Cable and plug versions • Excellent EMC performance • Mute function (sensor blanking) Product Description Ordering Key PD30CNG02PPM5MU The PD30CNG02 sensor familycomesin a compact 10 x 30 x 20 mm reinforced PMMA/ABS housing. The sensors are useful in applicationswhere detection of transparent objects are needed. Compact housing and high power LED for excellent per- formance-size ratio. Type Selection The Teach-In function for adjustmentof the sensitivity makes the sensors highly flexible.Theoutputtypeis preset (NPN or PNP), and the outputswitchingfunctionis programmable (NO or NC). Themutefunctioncanbe usedfortestingthesensor for:Malfunctioning, discon- nection,opticalaxisadjust- ment, dusty and dirty lenses. Type Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection type Mute HousingRangeConnection Ordering no. Ordering no. W x H x DSn NPN PNP Make or break switchingMake or break switching 10 x 30 x 20 mm 2 m Cable PD 30 CNG 02 NPMUPD 30 CNG 02 PPMU 10 x 30 x 20 mm 2 m Plug PD 30 CNG 02 NPM5MU PD 30 CNG 02 PPM5MU Note: Reflectors to be ordered separately Specifications Rated operating distance (Sn)Up to 2 m, with reflector Ø 80 mm (ER4) Detection reliability 20% attenuation Blind zone 10 mm Sensitivity Adjustable by Teach-In Temperature drift ≤ 0.1%/ºC Teach settings are valid for teach temperature ± 20°C Hysteresis (H) (differential travel) ≤ 10% Rated operational volt. (UB )10 to 30 VDC (ripple included) Ripple (Urpp ) ≤ 10% Output current Continuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA (max. load capacity 100 nF) No load supply current (Io)≤ 30 mA @ 24 VDC Minimum operational current (Im) 0.5 mA OFF-state current (Ir ) ≤ 100 µA Voltage drop (Ud ) ≤ 2.4 VDC @ 100 mA Protection Short-circuit, reverse polarity and transients Light source inGaAlP, LED, 617 nm Light type, not polarized Red, modulated Sensing angle ± 2º Ambient light10,000 lux Light spot110 mm @ 1.5 m Operating frequency1000 Hz Response time OFF-ON (tON)≤ 0.5 ms ON-OFF (tOFF ) ≤ 0.5 ms Power ON delay (tv) ≤ 300 ms Output function NPN and PNPPreset NO/NC switching function Set up by button Mute function Emitter off 0 to 3 sec0 to 2.5 VDC (NPN) 5 to 30 VDC (PNP) Operating modeNot connected Indication Output ON LED, yellow Signal stability ON and power ON LED, green Environment Installation categoryIII (IEC 60664/60664A 60947-1) Specifications are subject to change without notice (22.09.2010) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.