PD30CNR06PPRT CARLO GAVAZZI Selected parameters SYSTEM Retro-reflective HOUSING rectangular SENSING RANGE 6 ..

Photoelectrics
Retro-reflective
Type PD30CNR06....RT
• Miniature sensor range
• Range: 6 m, with reflector
• Sensitivity adjustment by Teach-In programming
• Modulated, infrared light 880 nm
• Supply voltage: 10 to 30 VDC
• Output: 100 mA, NPN or PNP preset
• Make and break switching function programmable
• LED indication for output, stability and power ON
• Protection: reverse polarity, short circuit and transients
• Cable and plug versions
• Excellent EMC performance
• Remote teach features
Product Description
Ordering Key
PD30CNR06PPM5RT
ThePD30CNR06sensor familycomesin a compact
10 x 30 x 20 mm reinforced
PMMA/ABS housing.
Thesensorsareusefulin applications wherehigh- accuracy detection as well as small size is required. Compacthousingandhigh power LED for excellent per- formance-size ratio.
The Teach-In function for adjustmentof the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is programmable (NO or NC).
A remote teach feature allow the sensor to be set up from e.g. a PLC.
Type
Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type
Output configuration Connection type Remote teach
Type Selection
HousingRangeConnection Ordering no. Ordering no. W x H x DSn NPN PNP
Make or break switchingMake or break switching
10 x 30 x 20 mm 6 m Cable PD 30 CNR 06 NPRT PD 30 CNR 06 PPRT
10 x 30 x 20 mm 6 m Plug PD 30 CNR 06 NPM5RTPD 30 CNR 06 PPM5RT
Note: Reflectors to be ordered seperately
Specifications
Rated operating distance (Sn)Up to 6 m, with reflector
Ø 80 mm (ER4)
4 m on ER4060 reflector
Blind zone 100 mm
Sensitivity Adjustable by Teach-In
Temperature drift ≤ 0.1%/ºC
Hysteresis (H)
(differential travel) ≤ 10%
Rated operational volt. (UB )10 to 30 VDC (ripple included)
Ripple (Urpp ) ≤ 10%
Output current
Continuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA
(max. load capacity 100 nF)
No load supply current (Io)≤ 30 mA @ 24 VDC
Minimum operational current (Im) 0.5 mA
OFF-state current (Ir ) ≤ 100 µA
Voltage drop (Ud ) ≤ 2.4 VDC @ 100 mA
Protection Short-circuit, reverse polarity and transients
Light source GaAlAs, LED, 880 nm
Light typeInfrared, modulated
Sensing angle ± 2º
Ambient light10,000 lux
Light spot110 mm @ 1.5 m
Operating frequency1000 Hz
Response time
OFF-ON (tON)≤ 0.5 ms
ON-OFF (tOFF ) ≤ 0.5 ms
Power ON delay (tv) ≤ 300 ms
Output function
NPN and PNPPreset
NO/NC switching function Set up by button
Remote teach function
Teach on (push button active) 0 to 2.5 VDC (NPN)
5 to 30 VDC (PNP)
Tamper proof When activated more than
20 sec. the sensor goes into a Tamper proof mode.
Indication
Output ON LED, yellow
Signal stability ON and power ON LED, green
Environment
Installation categoryIII (IEC 60664/60664A
60947-1)
Specifications are subject to change without notice (09.12.2008) 1