Selected parameters SYSTEM Retro-reflective HOUSING rectangular SENSING RANGE 6 ... 20 m CONNECTION Terminals OUTPUT RELAY SPDT MATERIAL Plastic Others SENSING RANGE 10 m HOUSING 68 x 71 x 25 mm MATERIAL PC + ABS
Photoelectrics Retro-reflective, Relay Output Type PMR • Range: 10 m • Modulated, infrared light • Make or break switching function (switch selectable) • LED-indication for target detected • Multi supply voltage: 12 to 240 VDC and 24 to 240 VAC, 50/60 Hz • 25 x 65 x 81 mm reinforced PC housing, IP 67 • Timer options (adjustable) • NO and NC output Product Description Ordering Key PMR10R G T Retro-reflective photoelectric switch.Range upto10m. Fixed sensitivity. Immune to ambient light. Output function switch selectable. Protection degree IP 67. Screw terminal connection. 25 x 65 x 81 mm plastichousing.PG 13.5or 1/2"NPT cable gland. Timer options: Delay on operate, delay on release, one shot (triggered on leading or trail- ing edge). Type PG 13.5 cable gland Option: Timer function Type Selection HousingRangeOrdering no. Ordering no. W x H x DSn without timerwith timer 25 x 65 x 81 PG 13.5 cable gland10 m PMR 10R G PMR 10R GT 1/2" NPT cable gland10 m PMR 10R I PMR 10R IT Specifications Rated operating dist. (Sn) PMR10.. 10 m (0 to 5,000 lux) with reflector type ER 4, ref. target Rated operational volt. (UB) 10.8 to 264 VDC (AC: 45 to 65 Hz) 21.6 to 264 VAC Rated operational power (Relay ON) ≤ 1.5 W (2.0 VA) Output Contact ratings (AgCdO) µ (micro gap) Resistive loadsAC 1 3 A/250 VAC DC 1 3 A/30 VDC Small inductive loadsAC 15 2 A/250 VAC DC 13 3 A/30 VDC Mechanical life ≥ 40 x 106 operations Electrical life≥ 5 x 105 operations at 220 VAC - 3 A resistive load: 360 impulses/h Dielectric voltage 2000 VAC rms (cont./supply) SensitivityFixed Light source GaAlAs, LED, 880 nm Light type Infrared, modulated Optical angle±2° Light spot size280 mm at 4 m Operating frequency (f)20 Hz Response time OFF-ON (tON)≤ 20 ms ON-OFF (tOFF) ≤ 30 ms Power ON delay (tv) ≤ 300 ms (typ. 100 ms) Output functionSwitch selectable, make or break switching Indication Target detectedLED, yellow Optional timer Delay on operate 0.1 to 7 s ± 2 s Delay on release0.1 to 7 s ± 2 s One shot0.1 to 7 s ± 2 s Environment Overvoltage category III (IEC 60664/60664A 60947-1) Pollution degree3 (IEC 60664/60664A 60947-1) Degree of protectionIP 67 (IEC 60529 60947-1) Temperature Operating-25° to +55°C (-13° to +131°F) Storage -30° to +80°C (-22° to +176°F) Specifications are subject to change without notice (02.03.2006)1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.