S142BRNT924 CARLO GAVAZZI Selected parameters SYSTEM Photo-Amplifier HOUSING rectangular SENSING RANGE Depe.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

S142BRNT924 CARLO GAVAZZI Selected parameters SYSTEM Photo-Amplifier HOUSING rectangular SENSING RANGE Depe..



Available Ship on today

Selected parameters SYSTEM Photo-Amplifier HOUSING rectangular SENSING RANGE Dependend on sensor CONNECTION Plug and Socket OUTPUT RELAY SPDT MATERIAL Plastic Others SENSING RANGE Up to 50 m HOUSING 80 x 75 x 35 mm MATERIAL NORYL ADDITIONAL Test input

More details

Photocells Photoelectric Sensors Detectors


Photoelectric Sensors

* Brand new product in its original packaging covered by the warranties and certifications provided by CARLO GAVAZZI

*This price is per unit and is the net value (not including taxes if applicable).

Related products

More info

Photoelectrics Amplifier Type S142B..
• µ-Processor controlled
• Amplifier relay for photoelectric switches
• Automatic or manual emitter power regulation
• Self-diagnostic functions
• Alignment help
• Rated operational voltage:
24 VAC/DC, 24 VAC, 115 VAC or 230 VAC
• Output 8 A/250 VAC SPDT relay and 100 mA NPN
• LED indication: Automatic gain, output, level, emitter or receiver fault
Product Description
Ordering Key
S142 B RNN924
µ-Processor controlled amplifier for one set of pho- toelectric sensors, type MOFTR. Utilisingan11-pin circular plug for easy con- nection.
8 A SPDT relay output, NPN
/ PNP transistor output or alarm output.Diagnostics for sensor test during oper-
ation. Alignment help via LED oralternation ofalarm output.Levelindicationfor dirt accumulation. Manual or automatic emitter power reg- ulation. Two emitter codes available for high neighbour immunity. ON- or OFF delay adjustable up to 10 sec.
Special function
Output type
(R-Relay, N-NPN, P-PNP, T-Test) Power supply
Type Selection
Function Ordering no.Ordering no.Ordering no.Ordering no.
Supply: 24 VAC/DC Supply: 24 VAC Supply: 115 VAC Supply: 230 VAC
NPN output & Test inputS142 B RNT 924S142 B RNT 115S142 B RNT 230
NPN output & Alarm output S142 B RNN 9241)S142 B RNN 0241) S142 B RNN 1151) S142 B RNN 2301)
PNP out., PNP Alarm & Test S142 B PPT 924S142 B PPT 115 S142 B PPT 230
1) Amplifier replacement for S1421156xxx
All amplifiers are provided with ON & OFF delay
Rated operational voltage (UB)
Pins 2 & 10230 195 to 265 VAC, 45 to 65 Hz
115 98 to 132 VAC, 45 to 65 Hz
024 20.4 to 27.6 VAC, 45 to 65 Hz
924 20.4 to 27.6 VAC/DCClass 2
Rated operational power
AC supply 3.3 VA
AC/DC supply 1.6 VA / 1.4 W
Delay on operate (tV) < 300 mS
Relay Rating (AgCdO)µ (micro gap)
Resistive loads AC1 8 A / 250 VAC (2500 VA) DC1 0.2 A / 250 VDC (50 W)
or 2 A 25 VDC (50 W) Electrical life (typical) AC1 > 100.000 operations
Transistor output data
Output current(Ie)< 100 mA @ 10-40 VDC (max. load capacity 100 nF)
Voltage drop(Ud)< 2,5 VDC @ 100 mA
Output function Make or break on DIP-switch
Transistor NPN / PNP, 100 mA,
10-40 VDC
AlarmNPN / PNP, 100 mA,
10-40 VDC
Delay on alarm 10 sec
Test input (Mute) NPNPNP
Emitter Enabled> 5.0 VDC < VCC - 3 VDC Emitter Disabled < 3.0 VDC > VCC - 5 VDC Imax @ 40 VDC1 mA
Protection output
transistor Reverse polarity, short circuit and transients
Supply to sensors
Emitter Pins 5 & 7
Supply voltage (open loop) 15 V square wave
Current < 450 mA, short circuit protected
Output resistance 10 Ω
ReceiverPins 6 & 8
Supply voltage (open loop) 5 VDC Short-circuit current 10 mA Input resistance470 Ω
Specifications are subject to change without notice (27.06.2014) 1

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
  Add review

Últimas Opiniones de Nuestros Clientes

Todas las valoraciones que recibimos de los artículos que ofrecemos son reales y están verificadas. Un pequeño gesto, pero de mucho valor. Por eso, te agradecemos ese minuto que inviertes en dejarnos tu opinión y calificación sobre los productos, porque nos ayuda a seguir mejorando y a ofrecerte un servicio de todavía mayor calidad.