PD60CNV20BPM5T CARLO GAVAZZI Selected parameters SYSTEM Fibre Optic HOUSING rectangular SENSING RANGE 200 ....

Photoelectrics, Fibre Optic Sensor
Glass Fibres
Type PD 60 CNV 20 BP .. T
• Range: Fibre dependent
- Diffuse Reflective typ. 80 mm
- Through Beam typ. 200 mm
• Teach-In (keyboard or remote setup)
• Microprocessor controlled and EEPROM parameter storage
• Operational voltage 10 - 30 V DC
• Output 100 mA, NPN and PNP
• Light or dark switching selectable
• IP65 proctection
• Timer: ON-delay or OFF-delay
Product Description
Ordering Key
PD 60 CNV 20 BP M5 T
The PD60CNV20BP.. Tisa fibre optic amplifier made spe- cific for glass fibres with tem- peratureupto250° C. The sensor is microprocessor based and has a build in pro- grammable functions such as Teach-In function for fast sensing distance optimising, NO or NC output, Time delay ON or OFF The sensor output is build as a Push-pull output that performs both a NPN and PNPoutputwhicharefully
protected against short-cir- cuit, transients and wrong polarity. The sensor is build in a strong13 x 30 x 60 mm polycarbonatehousingfor DIN-rail mounting.
The sensors are suitablefor applicationsthat require little space and high accuracy such as: Small part detection, tightlocations,checking parts, counting, precise part positioning,material handling and assembly and robotics
Type
Housing style Housing size Housing material Not used
Glass fibres
Sensing distance cm
Output type
Output configuration Connection type Teach-In mode
Type Selection
HousingRangeOrdering no. Ordering no.
W x H x DSn (Fibre dependent)NPN and PNP cable NPN and PNP plug
Make or break switchingMake or break switching
13 x 30 x 60 mm80 mm diffuse modePD 60 CNV 20 BP TPD 60 CNV 20 BP M5 T
200 mm through beam mode
Specifications
Rated operating distance (Sn)See optical fibre table
Diffuse mode Up to 80 mm
Through beam modeUp to 200 mm
Sensitivity
Teach-InAutomatic threshold set-up
Manual fine tune Sensitivity increase or sen- sitivity decrease
Temperature drift< 0,4%/C°
Hysteresis (H)
Differential travel £ 5%
Rated operational volt. (UB ) 10 to 30 VDC (ripple included)
Ripple (Urpp ) £ 10%
Output current
Continuous (Ie) 100 mA Short-time (I) 100 mA
No load supply current (Io) £ 40 mA
Voltage drop (Ud )
IL = 100 mA £ 2 VDC IL = 10 mA £ 1 VDC
Remote input
ON£ 1.4 VDC OFF³ 3.0 VDC
Timer
Range programmable 0 to 5 s in 11 steps
First step 40 ms
Following step500 ms
ProtectionShort-circuit, reverse pola- rity, transients
Light sourceGaAIAs, LED 660 nm Light type Red modulated Ambient light
Incandescent light10’000 Lux
Sunlight20’000 Lux
Specifications are subject to change without notice (14.11.2011) 1