Selected parameters SYSTEM Diffuse reflective HOUSING rectangular SENSING RANGE 1 ... 5 m CONNECTION Cable OUTPUT DC PNP MATERIAL Plastic Others SENSING RANGE 1 m HOUSING 30 x 20 x 10,8 mm MATERIAL ABS ADDITIONAL Dust output
Photoelectrics Diffuse-reflective Type PD30CND10....DU • Miniature sensor range • Range: 1 m • Sensitivity adjustment by Teach-In programming • Modulated, red light 660 nm • Supply voltage: 10 to 30 VDC • Output: 100 mA, NPN or PNP preset • Make or break switching function programmable • LED indication for output, stability and power ON • Protection: reverse polarity, short circuit and transients • Cable and plug versions • Excellent EMC performance • Dust alarm output Product Description Ordering KeyPD30CND10PPM5DU ThePD30CND10sensor familycomesin a compact 10 x 30 x 20 mm reinforced PMMA/ABS housing. Thesensorsareusefulin applications wherehigh- accuracy detection as well as small size is required. Compacthousingandhigh powerLED forexcellent performance-size ratio. Type Selection The Teach-In function for adjustmentof the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is oneNOorNCoutputand one dust output NO or NC. Type Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection type Dust Output Housing Range ConnectionOrdering no. Ordering no. W x H x D Sn NPNPNP Make or break switchingMake or break switching 10 x 30 x 20 mm 1 mCablePD 30 CND 10 NPDU PD 30 CND 10 PPDU 10 x 30 x 20 mm 1 mPlug PD 30 CND 10 NPM5DUPD 30 CND 10 PPM5DU Specifications Rated operating distance (Sn)Up to 1 m, referece target Kodak test card R27, white, 90% reflective, 200 x 200 mm Blind zone 20 mm Sensitivity Adjustable by Teach-In Temperature drift ≤ 0.1%/ºC Hysteresis (H) (differential travel) ≤ 10% Rated operational volt. (UB )10 to 30 VDC (ripple included) Ripple (Urpp ) ≤ 10% Output current Continuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA (max. load capacity 100 nF) Dust output current Continuous (Ie) ≤ 20 mA Short-time (I) ≤ 20 mA (max. load capacity 100 nF) No load supply current (Io)≤ 30 mA @ 24 VDC Minimum operational current (Im) 0.5 mA OFF-state current (Ir ) ≤ 100 µA Voltage drop (Ud ) ≤ 2.4 VDC @ 100 mA Protection Short-circuit, reverse polarity and transients Light source GaAlAs, LED, 660 nm Light typeRed, modulated Sensing angle ± 2º Ambient light10,000 lux Light spot110 mm @ 1.5 m Operating frequency1000 Hz Response time OFF-ON (tON)≤ 0.5 ms ON-OFF (tOFF ) ≤ 0.5 ms Power ON delay (tv) ≤ 300 ms Output function NPN and PNPPreset Output configurationNO or NC Programming options Output pin 4 black NO or NC Output pin 2 white NO or NC (dust) Dust alarm output Delay on operate 20 ms Indication Output ON LED, yellow Signal stability ON and power ON LED, green Specifications are subject to change without notice (19.08.2010) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.