Selected parameters SYSTEM Diffuse reflective BGS HOUSING rectangular SENSING RANGE 200 ... 400 mm CONNECTION Cable OUTPUT DC NPN MATERIAL Plastic Others SENSING RANGE 200 mm HOUSING 30 x 20 x 10,8 mm MATERIAL ABS ADDITIONAL Top Potentiometer
Photoelectrics Diffuse-reflective, Background Suppression Type PD30CTB20....SA • Miniature sensor range • Range: 200 mm • Sensitivity adjustment by top potentiometer • Modulated, red light 625 nm • Supply voltage: 10 to 30 VDC • Output: 100 mA, NPN or PNP preset • Make and break switching function • LED indication for output, stability and power ON • Protection: reverse polarity, short circuit and transients • Excellent EMC performance • Exelent colour matching Product Description Ordering Key PD30CTB20NASA ThePD30CTB20sensor family comesin a compact 10 x 30 x 20 mm reinforced PMMA/ABS housing. Thesensorsareusefulin applicationswherehigh-ac- curacydetectionas well as small size is required. Compacthousingandhigh powerLED forexcellent performance-size ratio. Type Selection Thepotentiometer function for adjustment of the sen- sitivity makes the sensors highly flexible. Theoutput type is preset (NPN or PNP), and the output switching functionis NO and NC out- put. Type Housing style Housing size Housing material Housing Detection principle Sensing distance Output type Output configuration Sensitivity adjustment Housing Range Connection Ordering no. Ordering no. W x H x D Sn NPN PNP Make and break switching Make and break switching 10 x 30 x 20 mm 200 mm CablePD 30 CTB 20 NASAPD 30 CTB 20 PASA Specifications Rated operating distance (Sn)Up to 200 mm, reference target, Kodak test card R27, white, 90% reflective, 100 x 100 mm Maximum detecting distance @ 200 mm white background White object 90% refl. ≤ 200 mm Grey object 18% refl.≤ 200 mm Black object 6% refl. ≤ 200 mm Blind zone 10 mm Sensitivity Electrical adjustmment210˚ Mechanical adjustment 240˚ Temperature drift ≤ 0.05%/ºC Hysteresis (H) ≤ 10% Rated operational volt. (UB )10 to 30 VDC (ripple included) Ripple (Urpp) ≤ 10% Output current Continuous (Ie)≤ 100 mA Short-time (I)≤ 100 mA (max. load capacity 100 nF) No load supply current (Io) ≤ 20 mA @ UBmax ≤ 40 mA @ UBmin Minimum operational current (Im) ≤ 0.5 mA OFF-state current (Ir )≤ 100 µA Voltage drop (Ud ) ≤ 2 VDC @ Ie max Protection Short-circuit, reverse polarity and transients Light source InGaAlP, LED, 625 nm Light typeRed, modulated Emitter angle± 2.5º @ half the sensing distance Ambient light≤ 10,000 lux Operating frequency (f) ≤ 500 Hz Response time OFF-ON (tON)≤ 1 ms ON-OFF (tOFF) ≤ 1 ms Power ON delay (tv)≤ 200 ms Outputfunction Open collector NPN or PNP by sensor type Output switching functionN.O. and N.C. Specifications are subject to change without notice (20.08.2014) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.