Selected parameters SYSTEM Diffuse reflective BGS HOUSING rectangular SENSING RANGE 200 ... 400 mm CONNECTION Cable OUTPUT DC NPN MATERIAL Plastic Others SENSING RANGE 200 mm HOUSING 30 x 20 x 10,8 mm MATERIAL ABS
Photoelectrics Diffuse-reflective, Background Suppression Type PD30CNB20....SA • Miniature sensor range • Range: 200 mm • Sensitivity adjustment by potentiometer • Modulated, red light 625 nm • Supply voltage: 10 to 30 VDC • Output: 100 mA, NPN or PNP preset • Make and break switching function • LED indication for output, stability and power ON • Protection: reverse polarity, short circuit and transients • Cable and plug versions • Excellent EMC performance • Exelent colourmatching Product Description Ordering KeyPD30CNB20NAM5SA ThePD30CNB20sensor familycomesin a compact 10 x 30 x 20 mm reinforced PMMA/ABS housing. Thesensorsareusefulin applications wherehigh- accuracy detection as well as small size is required. Compacthousingandhigh power LED for excellent performance-size ratio. Thepotentiometer function for adjustment of the sensitiv- ity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is NO and NC output. Type Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection type Sensitivity adjustment Type Selection HousingRange Connection Orderingno.Orderingno. W x H x D SnNPN PNP Make and break switching Make and break switching 10 x 30 x 20 mm 200 mm CablePD 30 CNB 20 NASAPD 30 CNB 20 PASA 10 x 30 x 20 mm 200 mm PlugPD 30 CNB 20 NAM5SA PD 30 CNB 20 PAM5SA Specifications Rated operating distance (Sn)Up to 200 mm, reference target, Kodak test card R27, white, 90% reflective, 100 x 100 mm Maximumdetecting distance @ 200 mm white background White object 90% refl. ≤ 200 mm Grey object 18% refl.≤ 200 mm Black object 6% refl. ≤ 200 mm Blind zone 10 mm Sensitivity Electrical adjustmment210˚ Mechanical adjustment240˚ Temperature drift≤ 0.05%/ºC Hysteresis (H)≤ 10% Rated operational volt. (UB )10 to 30 VDC (ripple included) Ripple (Urpp ) ≤ 10% Output current Continuous (Ie) ≤ 100 mA Short-time (I) ≤ 100 mA (max. load capacity 100 nF) No load supply current (Io) ≤ 20 mA @ UBmax ≤ 40 mA @ UBmin Minimum operational current (Im) ≤ 0.5 mA OFF-state current (Ir )≤ 100 µA Voltage drop (Ud ) ≤ 2 VDC @ Ie max ProtectionShort-circuit, reverse polarity and transients Light sourceInGaAlP, LED, 625 nm Light type Red, modulated Emitter angle ± 2.5º @ half sensing distance Ambient light≤ 10,000 lux Operating frequency (f)≤ 500 Hz Response time OFF-ON (tON)≤ 1 ms ON-OFF (tOFF ) ≤ 1 ms Power ON delay (tv) ≤ 200 ms Output function Open collector NPN or PNP by sensor type Output switching functionN.O. and N.C. Specifications are subject to change without notice (08.11.2012) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.