PD12CNC01BPM1T CARLO GAVAZZI Selected parameters SYSTEM Colour Sensor HOUSING rectangular SENSING RANGE Depe..

Photoelectrics, FibreOptic Sensor
Colour Sensor
Type PD12CNC0.BPM1T
• Range: From 2 to 60 mm, fibre dependent
• Teach-In (keyboard or remote setup)
• Keyboard lock
• Detection of 1 or 1 to 4 recorded colours
• Microprocessor controlled and EEPROM parameter storage
• Operational voltage 24 V DC
• Output 100 mA, NPN and PNP
• Light or dark switching selectable
• M12 standard plug
• IP65 protection
• Timer: One shot function 0.05 to 5 s
Product Description
Ordering Key
PD12CNC04BPM1T
The Colour Sensor is a fibre opticamplifier made specifi- cally for recognition of 1 or 1 to 4 colours. Teaching of the coloursiseasilyperformed bymeans ofthe “Teach-in” function.Each colourhas a separate output which can be delayed up to 5 sec by means
of the built-in timer. The out- put function can also be pro- grammed to be either NO or NC.
The colour sensor is used for detectionof colouredlabels, marks,tags,wires,liquids, etc.
Type
Housing style Housing size Housing material Not used
Colour sensor Number of channels Output type
Output configuration Connection type Teach-In mode
Type Selection Amplifier
HousingRangeOrdering no. Ordering no. W x H x D 1-channel4-channel
61 x 115 x 26 mm2 to 60 mmPD12CNC01BPM1T PD12CNC04BPM1T
Type Selection Fibres
Detection distanceSpot Cable length Ordering no.
18 mmØ 1.5 mm 1000 mmFPDC01SCC100
40 - 60mm Ø 6.0 mm 1000 mmFPDC02SCC100
4 - 6 mmSmall tip 1000 mmFPDC03SCC100
2 - 4 mm12 mm Needle-nose tip 1000 mmFPDC04SCC100
2 - 4 mm40 mm Needle-nose tip 1000 mmFPDC05SCC100
Specifications
Detection distance (Sn) 2 to 60 mm, (fibre-dependent)
Analysis typeTrue RGB analysis
Teach inputActive4 to 24 VDC @10 µs minimum
Not active ≤ 1 VDC
Recording time 1 sec
Levels of sensitivityFine, medium and low
Temperature drift< 0,4%/C°
Rated operational volt. (UB )24 VDC ±10% (ripple included)
Ripple (Urpp)≤ 10%
Output current
Continuous (Ie) 100 mA Short-time (I) 100 mA
No load supply current (Io)120 mA
Voltage drop (Ud)
IL = 100 mA ≤ 2.2 VDC IL = 10 mA ≤ 0.5 VDC
Timer
Range programmable 0 to 5 s First step 50 ms Following steps250 ms
ProtectionShort-circuit, reverse pola- rity, transients
Light sourceLED, red, green and blue
Spot diameter0.5 mm
Ambient light
Incandescent light3’000 Lux
Sunlight5’000 Lux
Specifications are subject to change without notice (13.01.2014) 1