Accessories AC Split-Core Current Transformer Type CTD-5S (max 26x32 mm) • Bus-bar type split core current transformer • Class 1 accuracy • Currents from 100 A to 400 A • Up to 6 Bus-bar isolated fixing screws • Double screw terminals (up to 8-wire connections) • Sealable terminal block covers • Sealable fixing split-core screws Product Description Ordering Key CTD-5S 400 5AXXX Split-core current transformer with bus-bar mountng facility. Rated primary currents from 100 A to 400 A. Model Primary current Secondary current Option Type Selection Primary current From 100A to 400A (Refer to the Range Table) Secondary current 1A (on request) 5A Option XXX:none XTX: tropicalization (on request) InputSpecifications Operating frequency48 to 62 Hz Max. system voltage0.72 kV Rated insulation level3 kV/1 min. @ 50 Hz Insulation class E (max 75°C) Short-time current rating Ith Typical 100 In /1 s Idyn 2.5 Ith The short-timethermal current Ith is anyway limited by the cable/bus-bar size Extended current rating 120% Security factor (FS)≤ 5 (Class: 1 and 3) General Specifications Standards According to EN60044-1 HousingABS, self-extinguishing: UL 94 V-0 MountingBus-bar mounting Standard accessoriesTwo terminal block screws. Six cable/bus-bar fixing screws. Six plastic caps for cable/bus-bar fixing screws. Two sealable terminal block covers. Special features1 A secondary current, Tropicalization Working temperature-25°C to +60°C (-13°F to 140°F) (R.H. < 90% non condensing @ 40°C) Storage temperature-30°C to +70°C (-22°F to 158°F) (R.H. < 90% non condensing @ 40°C) Approvals CE, cURus and CSA Connection Screw type Cable cross section areaFrom 1.5 to 6 mm2 Min/Max screws tightening torque relevant to terminal block screws: From 1 to 2 Nm Max screws tightening torque relevant to the cable/bus-bar fixing screws: 0,3 Nm Protection degree IP00 (without sealable terminal covers) IP20 (with sealable terminal block covers + wire terminals) Cable diameter Max. 26 mm Bus-bar size Max. 26x32 mm WeightFrom 450 to 700 g Output Specifications Rated secondary current5 A or 1 A Specifications are subject to change without noticeCTD-5S DS ENG 210711 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.