Selected parameters OUTPUT SIGNAL 2 relays SETPOINTS 2, adjustable MONITORED VARIABLE 3-phase AC voltage monitoring Others SIZE 36 mm POWER SUPPLY RANGE 380÷415 VAC MONITORING FUNCTION Under and over voltage, phase sequence/loss, asymmetry, tolerance MOUTING Plug-in INPUT RANGE 380÷415 VAC OTHERS VLN monitoring
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01 DPC01 PPC01 • TRMS 3-phase over and under voltage, phase sequence, phase loss, asymmetry and tolerance monitoring relay • Detect when all 3 phases are present and have the correct sequence • Detect if all the 3-phase-phase or phase-neutral voltages are within the set limits • Detect if asymmetry and tolerance are within the set value • Separately adjustable setpoints • Separately adjustable delay functions (0.1 to 30 s) • Output: 2 x 8 A relay SPDT NE • For mounting on DIN-rail in accordance with DIN/EN 50 022 (DPC01) or plug-in module (PPC01) • 45 mm Euronorm housing (DPC01) or 36 mm plug-in module (PPC01) • LED indication for relays, alarm and power supply ON Product DescriptionOrdering key DPC 01 D M48 3-phase or 3-phase+neutral line voltage monitoring relay forphase sequence, phase loss, asymmetry, tolerance, over and under voltage (sep- arately adjustable set points) with built-in time delay func- tion. Supplyranges from100 to 690VAC coveredbythree multivoltage relays. Housing Function Type Item number Output Power Supply Type Selection Supply:Supply: Supply: Mounting Output Frequency100 to 115 VAC 208 to 240 VAC 380 to 415 VAC DIN-rail2 x SPDT 50 - 60 HzDPC 01 D M23 DIN-rail2 x SPDT 50 - 400 HzDPC 01 D M11 400HZDPC 01 D M23 400HZDPC 01 D M48 400HZ Plug-in 2 x SPDT 50 - 60 HzPPC 01 D M23PPC 01 D M48 Supply:Supply: Supply: Mounting Output Frequency440 to 480 VAC380 to 480 VAC 600 to 690 VAC DIN-rail2 x SPDT 50 - 60 HzDPC 01 D M48DPC 01 D M69 DIN-rail2 x SPDT 50 - 400 HzDPC 01 D M49 400HZDPC 01 D M69 400HZ InputSpecifications Input L1, L2, L3, N DPC01: Terminals L1, L2, L3, N PPC01: Terminals 5, 6, 7, 11 Measure their own supply Note: Connect the neutral only if it is intrinsically at the star centre Measuring ranges M1185 to 132 ∆VAC M23177 to 275 ∆VAC M48 DPC01 323 to 550 ∆VAC DPC01 400HZ 323 to 475 ∆VAC PPC01 323 to 475 ∆VAC M49 DPC01 375 to 550 ∆VAC M69 DPC01 510 to 793 ∆VAC Ranges Upper level +2 to +22% of the nominal voltage Lower level -22 to -2% of the nominal voltage Asymmetry 2 to 22% of the nominal voltage Tolerance2 to 22% of the nominal voltage Note: The input voltage must not exceed the maximum rated voltage or drop below the minimum rated voltage reported above. Hysteresis Set points from 2 to 5% 1% Set points from 5 to 22% 2% Specifications are subject to change without notice (06.04.10)1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.