Selected parameters OUTPUT SIGNAL 1 relay SETPOINTS 2, adjustable MONITORED VARIABLE 3-phase AC voltage monitoring Others SIZE 36 mm POWER SUPPLY RANGE 208÷240 VAC MONITORING FUNCTION Under and over voltage, phase sequence, phase loss MOUTING DIN-rail INPUT RANGE 208÷240 VAC DELAY 1, adjustable OTHERS VLN monitoring
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multi-function Type DPB71 • TRMS 3-phase over and under voltage, phase sequence and phase loss monitoring relay • Detects when all 3 phases are present and have the correct phase sequence • Detects if all the 3-phase-phase or phase-neutral volt- ages are within the set limits • Upper and lower limits separately adjustable • Measures its own power supply • Selection of measuring range by DIP-switches • Adjustable voltage on relative scale • Adjustable delay function (0.1 to 30 s) • Output: 5 A SPDT relay N.E. • For mounting on DIN-rail in accordance with DIN/EN 50 022 • 35.5 mm DIN-rail housing • LED indication for relay, alarm and power supply ON Product Description Ordering Key DPB 71 C M23 3-phase or 3-phase+neutral line voltage monitoring relay forphase sequence, phase loss, over and under voltage (separately adjustable set points) with built-intime delay function. Type Selection Supplyranges from208 to 480 VAC covered by two multivoltage relays. 35.5 mm wide housing suit- able both for back and front panel mounting. Housing Function Type Item number Output Power supply MountingOutput Supply: 208 to 240 VAC Supply: 380 to 480 VAC DIN-railSPDT DPB 71 C M23DPB 71 C M48 InputSpecifications Input L1, L2, L3, N Terminals L1, L2, L3, N Measures its own supply Note: Connect the neutral only if it is intrinsically at the star centre Measuring ranges 208 to 240 ∆ VAC 177 to 275 ∆ VAC 380 to 480 ∆ VAC 323 to 550 ∆ VAC Ranges Upper level +2 to +22% of the nominal voltage Lower level -22 to -2% of the nominal voltage Note: The input voltage must not exceed the maximum rated voltage or drop below the minumum rated voltage reported above. Hysteresis Set points from 2 to 5% 1% Set points from 5 to 22% 2% Output Specifications OutputSPDT relay Rated insulation voltage 250 VAC Contact ratings (AgSnO2) µ Resistive loadsAC 1 5 A @ 250 VAC DC 12 5 A @ 24 VDC Small inductive loads AC 15 2.5 A @ 250 VAC DC 13 2.5 A @ 24 VDC Mechanical life≥ 30 x 106 operations Electrical life≥ 105 operations (at 5 A, 250 V, cos ϕ = 1) Operating frequency ≤ 7200 operations/h Dielectric strength Dielectric voltage2 kVAC (rms) Rated impulse withstand volt. 4 kV (1.2/50 µs) Supply Specifications Power supplyOvervoltage cat. III Rated operational voltage(IEC 60664, IEC 60038) through terminals:L1, L2, L3, N M23 - Delta Voltage: 208 to 240 VAC ± 15% 45 to 65 Hz M48 - Delta Voltage: 380 to 480 VAC ± 15% 45 to 65 Hz M48 - Star Voltage: 220 to 277 VAC ± 15% 45 to 65 Hz Rated operational power DPB71CM2313 VA @ 230 ∆VAC, 50 Hz DPB71CM4813 VA @ 400 ∆VAC, 50 Hz Supplied by L1 and L3 Specifications are subject to change without notice (31.03.10)1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.