Selected parameters OUTPUT SIGNAL 1 relay SETPOINTS 2, adjustable MONITORED VARIABLE 3-phase AC voltage monitoring Others SIZE 22,5 mm POWER SUPPLY RANGE 208÷240 VAC MONITORING FUNCTION Under and over voltage, phase sequence, phase loss MOUTING DIN-rail INPUT RANGE 208÷240 VAC DELAY 1, adjustable
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multi-function Types DPB01, PPB01 DPB01 PPB01 • TRMS 3-phase over and under voltage, phase sequence and phase loss monitoring relays • Detect when all 3 phases are present and have the correct phase sequence (except for N versions) • Available versions (W4) supplied between phase and neutral • Detect if all the 3-phase-phase or phase-neutral volt- ages are within the set limits • Upper and lower limits separately adjustable • Measure their own power supply • Selection of measuring range by DIP-switches • Adjustable voltage on relative scale • Adjustable delay function (0.1 to 30 s) • Output: 8 A SPDT relay N.E. • For mounting on DIN-rail in accordance with DIN/EN 50 022 (DPB01) or plug-in module (PPB01) • 22.5 mm Euronorm housing (DPB01) or 36 mm plug-in module (PPB01) • LED indication for relay, alarm and power supply ON Product Description Ordering Key DPB 01 C M23 3-phase or 3-phase+neutral line voltage monitoring relay forphase sequence, phase loss, over and under voltage (separately adjustable set Type Selection points) with built-intime delay function. Supplyranges from208 to 480VACcoveredbytwo multivoltage relays. Housing Function Type Item number Output Power supply MountingPhase sequence Output Supply:Supply:Supply: detection 208 to 240 VAC380 to 415 VAC 380 to 480 VAC DIN-railyesSPDT DPB 01 C M23 DPB 01 C M48 W4DPB 01 C M48 Plug-in yesSPDT PPB 01 C M23 PPB 01 C M48 W4 Plug-in yesSPDT PPB 01 C M48 DIN-railno SPDT DPB 01 C M23 N DPB 01 C M48 N W4DPB 01 C M48 N Plug-in no SPDT PPB 01 C M23 NPPB 01 C M48 N W4 Plug-in no SPDT PPB 01 C M48 N InputSpecifications Input L1, L2, L3, N DPB01: Terminals L1, L2, L3, N PPB01: Terminals 5, 6, 7, 11 Measure their own supply Note: Connect the neutral only if it is intrinsically at the star centre Measuring ranges 208 to 240 VAC177 to 275 VL-L AC M23 versions 380 to 415 VAC323 to 475 VL-L AC PPB01CM48 PPB01CM48N D/P PB01CM48W4 D/P PB01CM48NW4 380 to 480 VAC 323 to 550 VL-L AC DPB01CM48 DPB01CM48N Ranges Upper level +2 to +22% of the nominal voltage Lower level -22 to -2% of the nominal voltage Note: The input voltage must not exceed the maximum rated voltage or drop below the minumum rated voltage reported above. Hysteresis Set points from 2 to 5% 1% Set points from 5 to 22% 2% Specifications are subject to change without notice (31.03.10)1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.