Selected parameters MODULE TYPE Serial interface HOUSING DIN-rail I/O TYPE Serial protocol NUMBER OF I/O 0 Others MODULE TYPE RS232/RS485 interface I/O TYPE Scheider PLC protocol MAIN CHARACTERISTICS DIN-rail serial RS232/RS485 interface with Schneider PLC protocol, channel generator
Dupline® Plug & Play Master Module Interface forSchneider (Telemecanique & Modicon) PLC Type G 3496 0007 • Schneider (Telemecanique & Modicon) Slave • Plug and play: Automatic communication with specific PLC/Controllers • Built-in normal Dupline® Channel Generator • 128 I/O’s and DC power supply on 3 wires • RS485 port for interfacing to control system • Split-I/O mode selectable (128 inputs and 128 outputs) • LED-indications for supply, Dupline® carrier and Com- port TX • Galvaniccally isolated Com-port supplied by internal DC/DC converter Product Description Ordering KeyG 3496 0007 700 G 3495 0007 is designed as a cost-effectivesolutionfor interfacing Dupline® I/O’s to allSchneiderPLCs– the Telemecanique and Modicon families.Itperformsthree functions: Dupline®channel generator, power supply syn- chronization (enables 3-wire system with supply) and RS485 interface. Type: Dupline® H4-Housing Combined module Interface type DC supply Type Selection SupplyPLC Interface Conformance Ordering no. 20-30 VDCSchneider, Telemecanique and Modicon.G 3496 0007 700 Input/Output Specifications Power Output Output voltage20-30 VDC (pulsating) Output current< 3.0 A @ 50°C Short circuit protection 4 A quick acting fuse Output voltage drop < 1.0 V Dupline®carrier Output voltage8.2 V (pulsating) Current < 60 mA Short circuit protection Yes Scan time 128 channels132.2 ms 64 channels69.8 ms Communication Port Standard RS485 Connection 9 pole female Sub-D Dielectric voltage Com-port-Dupline®1 kVAC (rms) ProtocolUnitelway V2 Channel Configuration in PLC Baud rate 9600 Data bits 8 Start bit - Stop bit 1 ParityOdd Flow-controlNone Pin assignment RS485 A 8 B 3 GND 5 Supply Specifications Power supplyOvervoltage cat. III (IEC 60664) Operational voltage (Vin)20-30 VDC Reverse polarity protectionNone Current consumption< 150 mA + Power load Power dissipation < 5 W Transient protection voltage800 V Dielectric voltage Supply – Dupline® None Supply – Com-port 1 kVAC (rms) Note: Use individual power supplies for all G349600xx700, as the input are not galvanic isolated from each other. General Specifications Power ON delay2 s Indication for Com-port TX LED, red Supply ON LED, green Dupline® carrier LED, yellow Environment Pollution degree2 (IEC 60664) Operating temperature0° to +50°C (+32° to +122°F) Storage temperature -50° to +85°C (-58° to +185°F) Humidity (non-condensing) 20 to 80% Mechanical resistance Shock15 G (11 ms) Vibration2 G (6 to 55 Hz) Dimensions H4-Housing Weight100 g Specifications are subject to change without notice (04.12.2014)1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.