Selected parameters MODULE TYPE Input/Output module HOUSING Open PCB I/O TYPE Contact input/NPN output NUMBER OF I/O 8 Others MODULE TYPE Input/Output module I/O TYPE Contact input/NPN output 200 mA MAIN CHARACTERISTICS Open PCB module with 4 contact inputs and 4 NPN transistor outputs
I/O-Module forElevators TypeG 2140 55.0 700 Duline® FieldbusInstallationbus • 4 push-button inputs • 4 PNP- or NPN-transistor outputs • Open printed circuit board • Bracket for DIN-rail mounting available • LED-indications for supply and Dupline®carrier • DC-supply • 3-wire system with Dupline®and supply of module and output load through G 3485 0000 700 • Channel coding by GAP 1605 Product DescriptionOrdering Key G 2140 5520 700 Direct interface to the I/O’s of elevator floor stations, lift-car signals and lift controls. The input pulses are prolonged to 0.5stoensure transferof fast pushbutton activations. Due to the small size of the module it can be integrated into most pushbutton panels. Only 3-wires needed to con- nect any number of I/O-units (including the DC-supply for the output load). Installer- friendly mounting,operation and maintenance without re- quirements for any special tools or programming. Type: Dupline® Open PCB I/O-module Number of I/Os I/O-type DC-supply TypeSelection SupplyOrdering no.Ordering no. NPN-outputs PNP-outputs 10-30 VDCG 2140 5510 700 G 2140 5520 700 Output Specifications G 2140 5510 700 G 2140 5520 700 Outputs4 NPN-transistors4 PNP-transistors Output voltage drop £ 1.2 V Output voltage Typ. Vin -2.0 V ³ Vin -2.8 V Current pr. output £ 200 mA£ 200 mA Max. total load £ 500 mA£ 500 mA Short circuit protection NoneNone Built-in protective diodes Yes Yes Off-state leakage current£ 100 µA£ 200 µA Response time1 pulse train (136 ms @ 128 ch.) 1 pulse train (136 ms @ 128 ch.) InputSpecifications Supply Specifications Inputs 4 contacts or NPN-transistor Open loop voltage8.0 VDC Short circuit current180 µA Start peak current 7 mA Contact resistance £ 100 W Cable length £ 3 m Transmission delay Input OFF - ON£ 20 ms + 1 pulse train Input ON - OFF£ 550 ms Power supplyOvervoltage cat. III (IEC 60664) Rated operational voltage (Vin) 10-30 VDC (ripple included) Ripple £ 3 V Reverse polarity protection Yes Current consumption£ 20 mA Power dissipation £ 1 W Inrush current £ 1 A Transient protection voltage 800 V Dielectric voltage Supply - Dupline® None Supply - Inputs None Supply - OutputsNone Specifications are subject to change without notice (29.04.03) 1 Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.