G34404443024 CARLO GAVAZZI Selected parameters MODULE TYPE Input/Output module HOUSING DIN-rail POWER SUPPLY..

Transceiver forDigital Signals
Type G 3440 4443
• 4-channel monostable transceiver
• 2 opto-isolated voltage inputs:
10 to 265 VAC/DC
• 2 SPST relay outputs
• Load 2 x 5 A/250 VAC
• H4-housing
• For mounting on DIN-rail (EN 50022)
• LED-indications for supply, Dupline® carrier, inputs and outputs
• AC or DC power supply
• Channel coding by GAP 1605
Product Description Ordering Key
G 3440 4443 024
Dupline®transceiverwith4 in-putsforAC/DCvoltages
and 2 SPST relay outputs.
Type: Dupline® H4-housing Transceiver
No. of channels Input/output type Power supply
Type Selection
SupplyOrdering no.
4 channels
2 x voltage input
2 x SPST relay outputs
24 VACG 3440 4443 024
115 VAC G 3440 4443 115
230 VAC G 3440 4443 230
15 to 30 VDCG 3440 4443 824
InputSpecifications
Inputs 2 voltage-type
Isolated in groups of 1 x 2
Input voltage VBB 10 to 265 VAC/DC Frequency range on AC45 to 400 Hz
Input voltage for signal “0”≤ 1 VAC/DC Input voltage for signal “1”≥ 10 VAC/DC
Input current for signal “1”Typ. 10 mA (VBB 10-18 VDC)
lower at other input voltages
Input current limiter Yes
Inrush current≤ 450 mA (@ VBB = 265 VDC) Operating time for signal “1” ≤ 1 pulse train + 3 ms
Operating time for signal “0” ≤ 1 pulse train + 50 ms
Cable length ≤ 25 m
Dielectric voltage
Inputs - Dupline® ≥ 4 kVAC (rms) Inputs - Outputs ≥ 4 kVAC (rms)
Output Specifications
Output2 SPST relays
Isolated in groups of 2 x 1
Contact ratings (AgCdO) µ (micro gap)
Resistive loads AC 1≤ 5 A/250 VAC (1250 VA) DC 1≤ 0.25 A/250 VDC (62 W) or≤ 5 A/25 VDC (125 W)
Inductive loads AC 152.5 A/230 VAC DC 135 A/24 VDC
Mechanical lifetime ≥ 30 x 106 operations
Electrical lifetime
(at max load)AC 1≥ 2 x 106 operations Operating frequency ≤ 7200 operations/h Dielectric voltage
Outputs - Dupline®≥ 4 kVAC (rms)
Response time1 pulse train
Specifications are subject to change without notice (23.10.2014) 1