Selected parameters MODULE TYPE Input module HOUSING DIN-rail POWER SUPPLY Bus-powered I/O TYPE Contact input NUMBER OF I/O 1 Others MODULE TYPE Input module HOUSING W22.5 I/O TYPE Contact input POWER SUPPLY Bus-powered MAIN CHARACTERISTICS Bus-powered input module with 1xcontact input
Transmitter forDigital Signals Type G 5010 1106 Duline® FieldbusInstallationbus • Single channel transmitter • Contact input • Input pulse prolongation • Codeable LED output e.g. for feedback purposes • Supplied by Dupline®, no external supply required • Mini-E housing • Direct wall or DIN-rail mounting • Channel coding by GAP 1605 Product Description Ordering Key G 5010 1106 Dupline®-powered single- channel transmitter in Mini-E housing with contact input. Especially well suited in places where no power supply is available. On the input, there is a built-in pulse-prolongation which ensures that even short input pulses are transmitted. Upon activation of the input a short charge current pulse ensures that the contacts are kept clean. On the front of the module, there is a red LED which can be coded for any Dupline®channel address for indication of channel ON status. There are only 4 termi- nals on the module: 2 for Dupline®and 2 for the input. Type: Dupline® Mini-E housing Function No. of channels Input type Type Selection Supply Ordering No. 1 channel Contact Supplied by Dupline® G 5010 1106 Supply Specifications Power supplySupplied by Dupline® Current consumption with LED OFF Typ. 450 µA with LED ON Typ. 1.2 mA InputSpecifications Inputs 1 contact Open loop voltage 2.5 VDC Short-circuit current17 µA Operating time for signal "1" < 1 pulse train + 10 ms Operating time for signal "0" < 1 pulse train + 500 ms Contact resistance< 1 kΩ Input pulse prolongation min. 272 ms Cable length< 3 m Dielectric voltage Input - Dupline®None General Specifications Environment Degree of protectionIP 20 Pollution degree3 (IEC 60664) Operating temperature-20° to +50°C (-4° to +122°F) Storage temperature -50° to +85°C (-58° to +185°F) Humidity (non-condensing) 20 to 80% Mechanical resistance Shock15 G (11 ms) Vibration 2 G (6 to 55 Hz) Dimensions 49 x 22.5 x 56 mm (L x W x H) MaterialPC/ABS blend Specifications are subject to change without notice (01.02.2007)1 Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.