Energy Management Accessories Type SIU TCP 2 • Virtual COM port serial device server (Serial Manager) • RS485 (2 wires) and RS232 serial port available • Auto detecting 10/100 Mbps Ethernet interface • Virtual COM software for Windows • Easy-to-use configuration software suite • Cigarette pack size • Wall and DIN-rail mounting • Built-in default key to restore factory default settings • Redundant dual DC power inputs for non stop operation Product Description How to orderSIU TCP2 The SIUTCP2 is a gateway between Ethernet (TCP/IP) and RS485 or RS232 serial communications. Data com- ing from the Ethernet (TCP/IP) is sent to the desig- nated RS485 or RS232 port and data being received from RS485 or RS232 port is senttotheEthernet(TCP/ IP) transparently. By encap- sulating serial data and trasportingitover ethernet, SIUTCP2 offersfull-duplex and bidirectionaldata.The SIUTCP2 allows to commu- nicate with a remote device both in the Intranet and Internet environment so the communication distance is increased. SIU TCP2 sup- portsTCPserver/client, UDP and VIRTUAL COM. SIU TCP2issuppliedwith an utility program (Serial Manager), a simple step-by- Model step installation software which allows to configure the network parameters ofSIUTCP2. The serial manager softwarepro- vides existing Windows based application to acces serial device by mapping the Virtual Comporttoa remoteserial server via Ethernet. Anyway the configuration can be also car- ried out through: the web-serv- er page, the Telnet Console. SIUTCP2 provides two power supply inputs which can be used simultaneously. If any of the powersuppliesfails, the other one powers the convert- er automatically. In this way an extra assurance of non stop operation is granted. Supply specification DC supply 9 to 30VDC, DC 5V Power-on indicationLED Power consumption300mA @ 9V (max) 1,5 Watt max AC/DC power supply adapter Not Included AD5V1A (US): American adapter on request 5V @ 1.25A AD5V1A (EU): European adapter on request 5V @ 1.25A Input/Output specifications LAN Ethernet 10/100 Mbps ConnectorRJ45 “Link” indication LED Off: Ethernet disconnected Blinking with green:Data is transmitting on Ethernet for 100Mbps Blinking with Orange: Data is transmitting on Ethernet for 10Mbps Protection Built-in 1.5kV magnetic isolation PortsTCP port 23 (Telnet) TCP port 4000 (firmware updating) TCP ports 950 and 966 (hostbased/driver mode) UDP port 1029 (broadcast, monitor) Virtual Serial COM ConnectorMale DB9 “Ready” indication LED, green Off: no data is trasmitting on COM port, Blinking: data is transmit- ting on COM port. RS485 (2 wires) signals Data+, Data-, GND Protection15kV ESD for all signals Serial communication parameter Parity None, even, odd, space, mark Data Bits7, 8 Stop Bits1, 2 Flow control RTS/CTS, XON/XOFF, NONE, DTR/DSR Baud rate 1200bps to 230kbps Protection15kV ESD Nodes and max distance 1unit load up to 32 (1000m) ProtocolsTCP/IP, UDP, SNMP, HTTP, Telnet, ARP, BOOTP, DHCP, ICMP Windows compatibilityWindows XP, Vista, 7, serv- er 2003 Run LEDRed LED Blinking (rate 0.5 sec) firmware is running normal- ly Specifications are subject to change without notice SIUTCP 2 DS 170712 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.