The indicated delivery times are from the reopening of our warehouses that will be closed for holidays from 14/08/2017 to 25/08/2017.
Selected parameters FUNCTION Energy analyzer MOUNTING DIN-rail and Panel POWER SUPPLY Self power supply OUTPUT DIGITAL INPUT DC/AC output (Opto Mosfet) INPUT TYPE 3-phase AC CONNECTION CT/VT COMMUNICATION RS485 Others RANGE 120VLN/230VLL AC 5(6)A or 1(6)A DISPLAY 6+1 DGT VARIABLES W, var, PF, Hz, Phase-sequence DIGITAL INPUTS none PULSE 1 ALARMS none ANALOGUE none
Energy Management Energy Analyzer Type EM210 • Easy connections management • Detachable display • Multi-use housing: for both DIN-rail and panel mount- ing applications • Class B (kWh) according to EN50470-3 • Class 1 (kWh) according to EN62053-21 • Class 2 (kvarh) according to EN62053-23 • Accuracy ±0.5 RDG (current/voltage) • Energy meter • Instantaneous variables readout: 3 DGT • Energies readout: 7 DGT • System variables: W, var, PF, Hz, Phase-sequence. • Single phase variables: VLL, VLN, A, PF • Energy measurements: total kWh (imported and exported) kvarh • TRMS measurements of distorted sine waves (volt- ages/currents) • Self power supply • Dimensions: 4-DIN modules and 72x72mm • Protection degree (front): IP50 • Application adaptable display and programming proce- dure (Easyprog function) Product description Three-phase energy meter with removable front LCD display unit.The same unit canbeusedeitherasa DIN-rail mounting or a panel mounting energy meter. This general purpose three-phase energy meter is suitable for both active and reactive energy metering for cost al- location but also for main electrical parameter meas- urement and retransmission (transducer function). Possi- bility to display also exported active energy (e.g. in case of regenerated energy in lifts or similarapplications).Hous- ing for DIN-rail mounting with IP50 (front) protection de- gree. Current measurements carried out by means of ex- ternal current transformers and voltage measurements carried out either by means of direct connection or by meansof potential trans- formers. EM210 is provided, as standard,witha pulsat- ing output foractive energy retransmission. In addition a 2-wire RS485 communica- tionportis available as an option. Specification are subject to change without notice EM210 DS 2901151
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.