Timers Delay onOperate Type EAS • Fail-safe two-wire connection • Low-cost • Multi-voltage: 24-230 VAC • Delay on operate • Time range: 0.5 s - 10 m • Knob-adjustable time setting • Output: SCR 10-500 mA (screws) and SCR 10-700mA (Fast-ON) • For mounting on DIN-rail in accordance with DIN/EN 50 022 • 22.5 mm small Euronorm housing SCREW FAST-ON Product DescriptionOrdering Key EAS S M23 10S F Small, low-cost mono function timer with adjustable time setting. Only 2-wire con- nection for easy and fail-safe use (see diagram). Type Selection For mounting on DIN-rail or directlyonsurfaceby screws.Thetimerisused e.g. to delay small industrial relays or 3-phase contactors. Housing Function Small E-line Output Power supply Time range Fast-ON connection MountingOutputTime range Connection Supply: 24 - 230 VAC/DC For DIN-rail SCR 0.5 - 10 s Screws EAS S M23 10S or for screw SCR 0.1 -1 m Screws EAS S M23 1M SCR 1 - 10 m Screws EAS S M23 10M For DIN-rail SCR 0.5 - 10 s Fast-ONEAS S M23 10S F or for screw SCR 0.1 -1 m Fast-ONEAS S M23 1M F SCR 1 - 10 m Fast-ONEAS S M23 10M F Time Specifications Time ranges 10 s 0.5 - 10 s 1 m0.1 - 1 m 10 m1- 10 m Time range accuracymax. setting: actual time ≥ max. set time min. setting: actual time ≤ min. set time Repeat accuracy ≤ 0.2% Time variation Within rated power supply ≤ 0.1%/V and ambient temperature ≤ 0.2%/°C Reset Time and output Power supply interruption ≥ 200 ms Output Specifications OutputSCR Output current Maximum load current (screw terminals)500 mA (Fast-ON connection) 700 mA Maximum current for 100 ms (screw terminals)5.5 A (Fast-ON connection) 7 A Minimum load current10 mA Leakage current≤ 3.5 mA @ 230 V typ.: 2 m Voltage drop≤ 8 VAC/DC typ.: 5 VAC/DC @ 50 mA Supply Specifications Power supplyOvervoltage cat. III (IEC 60664) Rated operational voltage(IEC 60038) 24-230 VAC/DC, -10/+15% Rated insulation voltage None Specifications are subject to change without notice (23.10.06)1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.