Solid State Relays Industrial, 1-Phase Analog Switching Type RM1E RM1E..AA RM1E..V • AC Solid State Relay • Analog switching (phase-angle control) for resistive and slightly inductive load applications • 4 - 20mA or 0 -10V control input • Rated operational current:25, 50, 75 and 100 AACrms • Rated operational voltage: Up to 600 VACrms • Variable intensity LED-indication according to input current • Integral snubber network • Polarized lockable control connector for safe connection for voltage controlled version Product Description Ordering Key RM 1E 60 AA 50 The analog switching relay works in accordance with the phase angle controlprinciple, i.e., the output switching point in the AC sine wave depends on the control input which can be either 4-20mA or 0-10VDC. 4 mA or 0VDC correspondto Type Selection zero output power whilst 20 mA or 10VDC correspond to full output power (near linear pow- er response). The relay switch- es off every time the output current crosses zero, and switches ONinaccordance with the applied control input. Solid State Relay Number of Poles Switching mode Rated operational voltage Control input Rated operational current Switching modeRated operational Rated operational Control input voltage current E: Analog switching23: 230 VACrms*25:25 AACrmsAA: 4 - 20 mADC 40: 400 VACrms 50:50 AACrmsV: 0-10VDC** 48: 480 VACrms 75:75 AACrms 60: 600 VACrms 100:100 AACrms * For nominal operational voltage of 110VACrms, use RM1E23... ** RM1E..V.. require an external supply voltage Selection Guide Rated operational Blocking Control Rated operational current voltage voltageinput 25 A 50 A 75A100 A 230 VAC 650 Vp 4 - 20 mARM1E23AA25 RM1E23AA50RM1E23AA100 0-10 VDC RM1E23V25 RM1E23V50RM1E23V100 400 VAC 850 Vp 4 - 20 mARM1E40AA25RM1E40AA50 RM1E40AA100 480 VAC 1200 Vp4 - 20 mARM1E48AA25 RM1E48AA50 RM1E48AA75 RM1E48AA100 0-10 VDC RM1E48V25 RM1E48V50RM1E48V100 600 VAC 1400 Vp4 - 20 mARM1E60AA25 RM1E60AA50RM1E60AA100 0-10 VDC RM1E60V25RM1E60V50 RM1E60V100 General Specifications RM 1E 23 ...RM 1E 40 ... RM 1E 48 ... RM 1E 60 ... Operational voltage range RM1E..AA.. 90 to 280 VAC340 to 460 VAC200 to 550 VAC410 to 660 VAC RM1E..V..90 to 265 VAC- 200 to 550 VAC410 to 660 VAC Blocking voltage650 Vp850 Vp 1200 Vp1400 Vp Operational frequency range 45 to 65 Hz 45 to 65 Hz 45 to 65 Hz 45 to 65 Hz Power factor> 0.75> 0.75> 0.75 > 0.75 Approvals UL, cUL, CSA*UL, cUL, CSA*UL, cUL, CSA* UL, cUL, CSA* CE-markingYesYesYesYes** * Approvals pending for RM1E..V... ** Heatsink must be connected to ground for 600V types Specifications are subject to change without notice (14.01.2015) 1
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.