RJD2A60D30E CARLO GAVAZZI Parameters selected Mounting SYSTEM DIN rail CATEGORY CURRENT NOMINAL 26-50 ACA NO..

Solid State Relays
2 Independently Switched Poles
Integrated Heatsink
TypeRJD2A- Duo
• 2 in 1 semiconductor contactor
• Two control inputs - two independently switched poles
• Direct copper bonding (DCB) technology
• LED-indication for each pole
• Housing free of moulding mass
• Cage clamp output terminals
• Input range: 4-32 VDC
• Operational ratings: up to 2x45 AAC and 600 VAC
• Blocking voltage: up to 1200 Vp
• Opto-isolation > 4000 VACrms
MIDI
POWER
Product DescriptionOrdering Key
RJ D 2 A 60 D30 E
Thisproduct isdesignedin such a way as to replace elec- tro-mechanical contactors in industrial heating and motor applications, especially when switching is frequent. This productis ready to mount on DIN-rail or chassis and comes with integral heatsink. Cage clampterminalsare usedto ensure secure load connection with cable up to 25mm2.
TypeSelection
The RJD2A series consists of two switching poles which are independently controlled. Green LEDs indicatethe sta- tus of each control input. The relay will switchon when the sinosodial curve crosses zero and switches off when the cur- rent crosses zero.
Solid State Relay
Two-in-one(Duo)
Number of switching poles
Switching mode
Rated operational voltage
Control voltage
Rated operational current
Terminal layout
SwitchingRated operationalControl voltage Rated operational mode voltagecurrent
A: Zero switching 23: 230 VACrmsD: 4-32VDC 30: 2x30 AACrms (Midi)
60: 600 VACrms 45: 2x45 AACrms (Power)
Selection Guide
Rated operational Control voltageRated operational current
voltage 2x30A (Midi) 2x45A (Power)
230VACrms 4-32VDCRJD2A23D30ERJD2A23D45E
600VACrms 4-32VDCRJD2A60D30ERJD2A60D45E
General Specifications
RJD2A23...RJD2A60...
Operational voltage range24 to 280 VAC 42 to 660 VAC Blocking voltage 650 Vp 1200 Vp Operational frequency range45 to 65 Hz45 to 65 Hz
Power factor³ 0.5 @ 230 VACrms ³ 0.5 @ 600 VACrms
ApprovalsUL, cUL UL, cUL CE-marking Yes Yes
Pollution degree2 2
Specifications are subject to change without notice (28.02.2007) 1