No products
Product successfully added to your shopping cart
Viewed products
-
709.4820 SCAME CABLE...
CABLE REEL TRIS 230 4 FRENCH SOCKETS + T
-
-
-
032751 LEGRAND...
LCS-CABLE C5E U/UTP PVC 305M. Sold in...
-
123B2511 DANFOSS...
ML80TB/ 220-240V 50HZ ~1/ SINGLE PACK
-
Connection clamp for lightning protection
Connection clamps for lightning protection systems are critical components designed to ensure electrical continuity and mechanical integrity in surge and lightning protection installations. These clamps, often referred to as lightning protection connectors or bonding clamps, are used to join conductors, tapes, or cables in a lightning protection...
Connection clamps for lightning protection systems are critical components designed to ensure electrical continuity and mechanical integrity in surge and lightning protection installations. These clamps, often referred to as lightning protection connectors or bonding clamps, are used to join conductors, tapes, or cables in a lightning protection network. They are typically rated for high fault currents, with materials such as copper, brass, or stainless steel to withstand corrosion and thermal stress. Key technical parameters include conductor cross-section compatibility (e.g., 8-10 mm diameter for round conductors or 20-30 mm width for flat tapes), clamping force, and resistance to environmental conditions like UV exposure and salt spray. The clamps may feature a bolted or spring-loaded mechanism for secure connections, ensuring low impedance paths for lightning currents to ground.
These clamps are primarily deployed in external lightning protection systems (LPS) on buildings, industrial facilities, and infrastructure such as telecommunications towers, wind turbines, and solar farms. They are used in air termination systems, down conductors, and earth termination networks. In industrial settings, they are installed in hazardous areas (e.g., ATEX zones) where spark prevention is critical. They also appear in bonding networks for equipotential bonding in electrical rooms and substations, ensuring that all metallic parts are at the same potential during a lightning strike.
Our catalog includes subcategories such as universal connection clamps for round conductors, flat tape clamps, and cross-connection clamps for T-junctions. Key article codes follow a pattern like "LPC-CC-001" for copper clamps or "LPC-SS-002" for stainless steel variants. These codes typically denote material (CC for copper, SS for stainless steel), type (e.g., "RC" for round conductor, "FT" for flat tape), and size rating. We stock clamps compatible with conductors from 6 mm to 12 mm diameter and tapes up to 40 mm width, with options for insulated or non-insulated versions.
Partnering with Electric Automation Network ensures access to genuine, certified lightning protection components with real-time pricing and global express shipping. Our engineering team provides technical support for selecting the correct clamp based on conductor type, environmental conditions, and local standards (e.g., IEC 62305, NF C 17-102). We offer detailed datasheets with installation torque values and corrosion resistance data, helping you avoid costly field failures.
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.