Isolation BSS fire - OBO BETTERMANN

Cable fire protection cushion Medium, 350x170x23, Grey, Glass mesh with special fire protection filling

KBK-2 fire insulation pad, medium 350x170x23mm Glass fabric with fire protection filling,

PYROBAG® intumescent pads. Intumescent cable pad made of narrow, dense and mechanically solid mesh glass fabric, with a special filling. Without mineral fibers, weather resistant and water resistant. Indoor use. Unlimited storage in dry rooms and protected against frost.

Fire protection foam in a cartridge, 380ml,

2-component fire protection foam PYROSIT® NG. PYROSIT® NG 2-component fire protection foam in a cartridge, including 2 mixing tubes.To create cable and combination insulation in interior areas; always process the coaxial cartridge 5:1 with FBS-PH or FBS-PA cartridge pistols.In dry, frost-free rooms, the cartridge can be stored closed and standing upright at temperatures from +5 °C to +30 °C for up to 12 months.Processing of products containing diisocyanate is subject to training in accordance with REACH ordinance (EG) 1907/2006, as amended by Regulation (EU) 2020/1149 of 4.8.2020. The training can be carried out online. Information on this can be found in the technical info under downloads on the product.

Pipe sleeve for combustible pipes, 58x26, Grey, Intumescent material

Pipe sleeve with 2 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M6 threaded rods.

Pipe sleeve for combustible pipes, 94x26, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

Pipe sleeve for combustible pipes, 132x26,6, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

Pipe sleeve for combustible pipes, 172x40, Grey, Intumescent material

Pipe sleeve with 4 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors of M6 threaded rods up to size 75 mm, then M8.

Pipe sleeve for combustible pipes, 220x40, Grey, Intumescent material

Pipe sleeve with 6 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M8 threaded rods.

Pipe sleeve for combustible pipes, 284x40, Grey, Intumescent material

Pipe sleeve with 8 fastening straps. Pipe sleeve for combustible pipes.If there is a fire, fire protection inserts inside the sheet steel housing expand, exerting a very great pressure onto the burning thermoplastic pipes. For interior application. Fastening with anchors or M8 threaded rods.

Mineral fibre plate for combination insulation, 1000x600x50, Mineral fibres

Mineral fibre plate, pre-coated. Mineral fibre plate, pre-coated with the PYROCOAT® ASX ablation coating, as the basis for the PYROPLATE® Fibre soft insulation system. 50 mm plate for insulation according to German approval. For interior application.

Mineral wool for fire protect. applications, 25 Liter, Yellow green, Mineral fibres

Mineral wool. Universal filling wool for various fire protection applications, packed in compressed form.Material class EN 13 501 - A1, non-combustible; melting point ≥ 1,000 °C.

Ablation coating in a bucket, 5kg, Intumescent material

Ablation coating PYROCOAT® in a bucket. Combined, endothermic and weatherproof coating for internal and external areas. Universal protection coating for cable and cable support structures. Use as direct filler, and as paint when stirred. Sufficient for an area of 4 m².Material class DIN 4102 - B2, normally flammable.In dry, frost-free rooms, the coating can be stored at temperatures from +5 °C to +25 °C for up to 18 months in closed, upright original containers.

Coil intumescent, Brown, Intumescent material

Cable coil. Self-adhesive, intumescent cable protector, 5 mm thick, for use with large cable diameters and penetrated cable support systems, applicable in PYROPLUG® systems and PYROSIT® NG. For interior application.

Calcium silicate plate for fire protect. applications, 500x250x30, Grey-white, Calcium silicate

Calcium silicate plate. Calcium silicate plate, as support plate, for the construction of frames in the penetration and to double thin wall thicknesses.Materials class EN 13501 - A1 non-combustible.

Steel wire grid large, 1000x600mm, Hot-dip galvanised, DIN EN ISO 1461, Steel, St

Steel wire grid. Steel wire grid as support and protection grid, wire diameter 4 mm

Tightening strap lock , Steel, St

Tightening strap lock. Tightening strap lock with buckle, for simple fixing of the tightening straps FSB-SB.

Fire protection bandage for wet and external areas, 1100x20000,

Fire protection box complete set,

Fire protection case. The PYROSIT® NG fire protection case contains all the required products to create foam insulations. The complete set contains 3 foam cartridges, 1 professional cartridge pistol, 6 mixing and 5 extension pipes. For interior application.

Pipe shell internally coated, Ø107x300, Grey, Polyvinylchloride, PVC

PYROCOMB® Intube pipe shell. Internally coated pipe shells with click lock. The inner space can be fitted with cables and electrical installation pipes completely. For interior application. CE-labelled, European approved construction product according to ETA-13/0904 and German general type approval. Fire resistance up to 120 minutes.Closing with 2 foam plugs included in the delivery. The surface seal is created with PYROCOAT® ASX coating.In some applications, the use of metallic tightening straps is prescribed to secure the pipe shells in light-duty partitions. Details can be found in the mounting instructions/approval.

Fire protection mortar for combination insulation, 20kg, Special mortar

PYROMIX® dry mortar in paper sack. Mortar to create cable and combination insulation in solid walls and ceilings. Suitable for pumping, pressing and for manual installation. Adding approx. 6 litres of water to 20 kg of dry mortar produces about 20 litres of workable compound. For interior application.In dry, frost-free rooms, the dry mortar can be stored for at least 12 months in closed original containers.

Pipe sleeve for combustible pipes, 353x51,5, Strip-galvanised, DIN EN 10147, Intumescent material

Pipe sleeve for combustible pipes, 403x51,5, Strip-galvanised, DIN EN 10147, Intumescent material

Pipe sleeve for combustible pipes, 459x51,5, Strip-galvanised, DIN EN 10147, Intumescent material

Fire protection bandage for jacketing, 1100x10000, Grey-white,

Foam block , 200x120x60, Brown, Permanently elastic, closed-pore foam

Vacuum block , 200x120x25, Brown, Permanently elastic, closed-pore foam

Plugs , Ø78mm, Red, Permanently elastic, closed-pore foam

Plugs , Ø122mm, Red, Permanently elastic, closed-pore foam

Plugs , Ø165mm, Red, Permanently elastic, closed-pore foam

Plugs , Ø250mm, Red, Permanently elastic, closed-pore foam

Identification plate for cable bandage, Polyvinylchloride, PVC

Identification plate. Universal identification plate to be written on with waterproof and light-resistant felt-tip pen for cable bandages, including two push-fit anchors.

Replacement battery for FBS-PA,

Identification plate for insulation systems,

Identification plate EN. Identification plate to be written on with waterproof and light-resistant felt-tip pen for fire-safe cable glands, including 2 push-fit anchors.