> ABB>Service Breakers>1SBL419001R8611 ABB AE75-30-11 110V DC Contactor
Previous Product Next Product

1SBL419001R8611 ABB AE75-30-11 110V DC Contactor

1SBL419001R8611

ABB

AE75-30-11 110V DC Contactor

AE75 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V AC / 1000 V AC or 220 V DC. The contactors can also be used for many other applications such as isolation, capacitor switching, lighting. The AE... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles and 2 built-in auxiliary contacts, front-mounted add-on auxiliary contact blocks - Control circuit: DC operated with standard double-winding DC coils (with add-on factory-mounted lagging contact for insertion of the"holding" winding) - Accessories: a wide range of accessories is available.

More details


Service Breakers

Brand new product in its original packaging covered by the warranties and certifications provided by ABB

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

▲

More info

▲


b'

General Information

Extended Product Type:
AE75-30-11 110V DC
Product ID:
1SBL419001R8611
EAN:
3471522109866
Catalog Description:
AE75-30-11 110V DC Contactor
Long Description:
AE75 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V AC / 1000 V AC or 220 V DC. The contactors can also be used for many other applications such as isolation, capacitor switching, lighting. The AE... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles and 2 built-in auxiliary contacts, front-mounted add-on auxiliary contact blocks - Control circuit: DC operated with standard double-winding DC coils (with add-on factory-mounted lagging contact for insertion of the"holding" winding) - Accessories: a wide range of accessories is available.
\n

Ordering

Minimum Order Quantity:
1 piece
Customs Tariff Number:
85364900

Popular Downloads

Data Sheet, Technical Information:\n1SBC100122C0202_Ch02
Instructions and Manuals:\nFPTC407700P0003

Dimensions

Product Net Width:
94 mm
Product Net Depth / Length:
108 mm
Product Net Height:
110 mm
Product Net Weight:
1.24 kg

Technical

Number of Main Contacts NO:
3
Number of Main Contacts NC:
0
Number of Auxiliary Contacts NO:
1
Number of Auxiliary Contacts NC:
1
Rated Operational Voltage:
Main Circuit 1000 V
Rated Frequency (f):
Supply Circuit 50 60 Hz
Conventional Free-air Thermal Current (Ith):
acc. to IEC 60947-4-1, Open Contactors q = 40 °C 125 A

acc. to IEC 60947-5-1, q = 40 °C 16 A
Rated Operational Current AC-1 (Ie):
(690 V) 40 °C 125

(690 V) 55 °C 105

(690 V) 70 °C 85
Rated Operational Current AC-3 (Ie):
(415 V) 55 °C 72 A

(440 V) 55 °C 70 A

(500 V) 55 °C 65 A

(690 V) 55 °C 46 A

(1000 V) 55 °C 28 A

(380 / 400 V) 55 °C 75 A

(220 / 230 / 240 V) 55 °C 75
Rated Operational Power AC-3 (Pe):
(415 V) 40 kW

(440 V) 40 kW

(500 V) 45 kW

(690 V) 40 kW

(380 / 400 V) 37 kW

(220 / 230 / 240 V) 22 kW
Rated Breaking Capacity AC-3 acc. to IEC 60947-4-1:
8 x Ie AC-3
Rated Making Capacity AC-3 acc. to IEC 60947-4-1:
10 x Ie AC-3
Rated Operational Current AC-15 (Ie):
(500 V) 2 A

(690 V) 2 A

(24 / 127 V) 6 A

(220 / 240 V) 4 A

(380 / 400 V) 3 A
Short-Circuit Protective Devices:
Auxiliary Circuit - gG Type Fuses 10 A

gG Type Fuses 160 A
Maximum Breaking Capacity:
cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 1300 A

cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 630 A
Maximum Electrical Switching Frequency:
(AC-1) 300 cycles per hour

(AC-2 / AC-4) 150 cycles per hour

(AC-3) 300 cycles per hour
Rated Operational Current DC-13 (Ie):
(24 V) 6 / 144 A

(48 V) 2.8 / 134 A

(72 V) 1 / 72 A

(125 V) 0.55 / 69 A

(250 V) 0.3 / 75 A
Rated Insulation Voltage (Ui):
acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 1000 V

acc. to IEC 60947-5-1 and VDE 0110 (Gr. C) 690 V

acc. to UL/CSA 600 V
Rated Impulse Withstand Voltage (Uimp):
8 kV
Mechanical Durability:
5 million
Maximum Mechanical Switching Frequency:
3600 cycles per hour
Rated Control Circuit Voltage (Uc):
DC Operation 110 V
Coil Consumption:
Average Holding Value, from Warm State 4 W

Average Pull-in Value, from Cold State 200 W

Pull-in at Max. Rated Control Circuit Voltage DC 200 W
Operate Time:
Between Coil De-energization and NC Contact Closing 8 ... 18 ms

Between Coil De-energization and NO Contact Opening 5 ... 15 ms

Between Coil Energization and NC Contact Opening 10 ... 27 ms

Between Coil Energization and NO Contact Closing 30 ... 30 ms
Connecting Capacity Main Circuit:
Flexible with Cable End 6 ... 16 mm²

Rigid Cable 6 ... 25 mm²
Connecting Capacity Auxiliary Circuit:
Flexible with Cable End 0.75 ... 2.5 mm²

Rigid Cable 1 ... 4 mm²
Degree of Protection:
acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP40
Connecting Terminals (delivered in open position) Main Poles:
M 6 (+,-) pozidriv 2 screws with 1x (13 x 10 mm) connector
Terminal Type:
Screw Terminals

Environmental

Ambient Air Temperature:
Close to Contactor Fitted with Thermal O/L Relay -25 ... +55 °C

Close to Contactor without Thermal O/L Relay (0.85 ... 1.1 Uc) -40 ... +55 °C

Close to Contactor without Thermal O/L Relay (Uc) -40 ... +70 °C

Close to Contactor for Storage -60 ... +80 °C
Climatic Withstand:
acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
Maximum Operating Altitude Permissible:
3000 m
RoHS Status:
Following EU Directive 2011/65/EU

Certificates and Declarations (Document Number)

ASEFA Certificate:\nASEFA_03101
CB Certificate:\nCB_CN45323
CCC Certificate:\nCCC_2018010304129269
CQC Certificate:\nCQC2018010304129269
CSA Certificate:\nCSA_1033838_LR056745
Declaration of Conformity - CCC:\n2020980304001621
Declaration of Conformity - CE:\n1SBD250804U1000
Environmental Information:\n1SBD250019E1003
GOST Certificate:\nGOST_POCCFRME77B07175
Instructions and Manuals:\nFPTC407700P0003
LOVAG Certificate:\nLOVAG_FR04001
RMRS Certificate:\nRMRS_0507015250
RoHS Information:\n1SBD250804U1000
UL Certificate:\nUL_20120830-E312527-10-1
UL Listing Card:\nUL_E312527

Container Information

Package Level 1 Units:
1 piece
Package Level 1 Width:
140 mm
Package Level 1 Depth / Length:
146 mm
Package Level 1 Height:
96 mm
Package Level 1 Gross Weight:
1.24 kg
Package Level 1 EAN:
3471522109866
Package Level 2 Units:
box 20 piece
Package Level 2 Width:
503 mm
Package Level 2 Depth / Length:
153 mm
Package Level 2 Height:
307 mm
Package Level 2 Gross Weight:
24.8 kg
Package Level 3 Units:
160 piece

Classifications

Object Classification Code:
Q
ETIM 4:
EC000066 - Magnet contactor, AC-switching
ETIM 5:
EC000066 - Magnet contactor, AC-switching
ETIM 6:
EC000066 - Power contactor, AC switching
ETIM 7:
EC000066 - Power contactor, AC switching
eClass:
V11.0 : 27371018
UNSPSC:
39121529
\n
'

Datasheet - PDF

▲
Title: Size: Type:
PDF CIRCUIT BREAKERS TMAX XT.pdf 26 Mbytes

Reviews (0) ▲

No customer reviews for the moment.

Add Review
Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
Do you recommend this product to buy?
  Captcha
  Add review

Latest Customer Reviews

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.

Newsletter
Follow us
My account