ND12D230CG CARLO GAVAZZI Módulo de seguridad Dos manos. Terminales tornillo fijo

Two hand safety Modules
ND12D
• Safety Category 4, Performance Level e according to EN13849-1
• Safety Category III C according to EN 574
• Safety Category 4 according to EN 954-1
• 2 NO safety outputs
• 1 PNP auxiliary output
• 1 NC relay auxiliary output
• Dual channel input
• Max delay between input 500 ms
• Automatic RESET
• Self monitoring
• Failure diagnosis by LEDs
• Approvals: TÜV NORD, UL
Product Description
Ordering Key
ND12 D 230
Two hand Safety module according to EN 60204-1, EN 292-1 /-2, EN 574 (safety category IIIC), EN 954-1 (safety category 4), EN
Type Selection
Power supply
24 VAC/VDC
110 VAC
230 VAC
13849-1 (safety category 4, Performance Level e).
These safety modules are suited to be used in applica- tions at the highest risk level as presses and punches.
References
ND12D ND12D110CG ND12D230CG
Housing Application Controlled Devices Safety Outputs Safety Category Power Supply
Electrical Specifications
Power supply
ND12D 24 VAC –15/+10% 50-60 Hz
24 VDC –15/+10% ND12D110CG 110 VAC –15+10% 50-60 Hz ND12D230CG 230 VAC –15+10% 50-60 Hz
Power consumption 4 VA /4 W Safety outputs 2 NO Auxiliary outputs 1 NC Relay
1 PNP
Contact ratings
Safety output
Resistive loads AC1 8 A @ 230 VAC Small inductive loadsAC15 3 A @ 230 VAC
DC13 4 A @ 24 VDC
Auxiliary output
Resistive loads AC1 5 A @ 230 VAC Small inductive loadsAC15 1.5 A @ 230 VAC
Contact fuse protection 6 A fast or 4 A delayed
Insulation voltage Pollution degree: 2
Overvoltage Cat.: 3/250 V
24 VAC/DC xxx AC Supply to input none 4 kV 1.2/50µs Supply to output 4 kV 1.2/50µs 4 kV 1.2/50µs Input to output 4 kV 1.2/50µs 4 kV 1.2/50µs
Time Specifications Environmental Specifications
Delay on energisation < 150 ms Delay on de-energisation < 30 ms Recovery time ≥ 30 ms Channel simultaneity < 500 ms
Mechanical Specifications
Protection degree terminals IP 20
Protection degree housing IP 40
Housing material Polyamid PA6.6
Housing type 22.5 housing models
Mounting DIN rail
Operating temperature -25°C ... + 55°C
Storage temperature -25°C ... + 65°C
Max cross section
of external conductors 2.5 mm2 flexible wire
2.5 mm2 rigid wire
Dimensions 22.5 x 99 x 114 mm
Weight ND12D 170 g
ND12D110CG, ND12D230CG 240 g
Specifications are subjected to change without notice (18.01.10) 1