MINI MCR-2-UNI-UI-UIRO-PT 2902028 PHOENIX CONTACT Universally configurable 4-way signal conditioner, with sw.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

MINI MCR-2-UNI-UI-UIRO-PT 2902028 PHOENIX CONTACT Universally configurable 4-way signal conditioner, with sw..

MINI MCR-2-UNI-UI-UIRO-PT

2902028

PHOENIX_CONTACT

Available

Ship on today

Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.

More details


* Brand new produt in its original packing covered by the warranties and certifications provided by PHOENIX_CONTACT

QuantityPrice
1+$252.65
2+$246.78
3+$243.86
4+$243.49
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



Product description

Configurable, freely adjustable 4-way signal conditioner with switching output and plug-in connection technology for the electrical isolation, conversion, amplification, and filtering of standard signals. Current signals between 0 mA ... 24 mA and voltage signals between 0 V ... 12 V can be processed on the input side. Signals between 0 mA ... 21 mA and 0 V ... 10.5 V are possible on the output side. The minimum measuring span is 1 mA and 0.5 V. Full accuracy is maintained with a measuring span greater than 10 mA and 5 V. You can configure the device using one of the free software solutions. Default settings can also be made directly on the device by simply using the DIP switches (see configuration table). The measuring transducer supports fault monitoring and NFC communication.

Dimensions

Width6.2 mm
Height110.5 mm
Depth120.5 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Degree of protectionIP20

Input data

Number of inputs1
Configurable/programmableYes
Voltage input signal0 V ... 10 V (via DIP switch)
2 V ... 10 V (via DIP switch)
0 V ... 5 V (via DIP switch)
1 V ... 5 V (via DIP switch)
10 V ... 0 V (via DIP switch)
10 V ... 2 V (via DIP switch)
5 V ... 0 V (via DIP switch)
5 V ... 1 V (via DIP switch)
0 V ... 12 V (Can be set via software)
Current input signal0 mA ... 20 mA (via DIP switch)
4 mA ... 20 mA (via DIP switch)
0 mA ... 10 mA (via DIP switch)
2 mA ... 10 mA (via DIP switch)
20 mA ... 0 mA (via DIP switch)
20 mA ... 4 mA (via DIP switch)
10 mA ... 0 mA (via DIP switch)
10 mA ... 2 mA (via DIP switch)
0 mA ... 24 mA (Can be set via software)
Max. input voltage12 V
Max. input current24 mA
Input resistance of voltage input> 120 kΩ
Input resistance current inputapprox. 50 Ω

Output data

Number of outputs1
Configurable/programmableYes
Voltage output signal0 V ... 10 V (via DIP switch)
2 V ... 10 V (via DIP switch)
0 V ... 5 V (via DIP switch)
1 V ... 5 V (via DIP switch)
0 V ... 10.5 V (Can be set via software)
Current output signal0 mA ... 20 mA (via DIP switch)
4 mA ... 20 mA (via DIP switch)
0 mA ... 10 mA (via DIP switch)
2 mA ... 10 mA (via DIP switch)
0 mA ... 21 mA (Can be set via software)
Max. output voltageapprox. 12.3 V
Max. output current24.6 mA
Load/output load voltage output≥ 10 kΩ
Load/output load current output≤ 600 Ω (at 20 mA)

Switching output

Output nameSwitching output
Number of outputs1
Contact type1 N/O contact
Maximum switching voltage30 V DC
Max. switching current100 mA (at 30 V)

Power supply

Nominal supply voltage24 V DC
Supply voltage range9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Typical current consumption32 mA (24 V DC)
63 mA (12 V DC)
Power consumption≤ 1 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)

Connection data

Connection methodPush-in connection
Single conductor/terminal point, solid, with ferrule, min.0.14 mm²
Single conductor/terminal point, solid, with ferrule, max.2.5 mm²
Single conductor/terminal point, solid, without ferrule, min.0.14 mm²
Single conductor/terminal point, solid, without ferrule, max.2.5 mm²
Conductor cross section flexible min.0.14 mm²
Conductor cross section flexible max.2.5 mm²
Min. AWG conductor cross section, flexible24
Max. AWG conductor cross section, flexible12
Stripping length10 mm

General

No. of channels1
Maximum transmission error0.1 % (of final value)
Maximum temperature coefficient0.01 %/K
Step response (10-90%)approx. 140 ms (15 Hz sample rate)
approx. 45 ms (60 Hz sample rate)
approx. 25 ms (240 Hz sample rate)
Status displayYellow LED (switching output)
Electrical isolationReinforced insulation in accordance with IEC 61010-1
Overvoltage categoryII
Pollution degree2
Rated insulation voltage300 V (effective)
Test voltage, input/output/supply3 kV (50 Hz, 1 min.)
Electromagnetic compatibilityConformance with EMC Directive 2004/108/EC
Noise emissionEN 61000-6-4
Noise immunityEN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Colorgray
Housing materialPBT
Mounting positionany
Assembly instructionsThe T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
ConformanceCE-compliant
ATEXEx II 3 G Ex nA IIC T4 Gc X
UL, USA / CanadaUL 508 Listed
Class I, Div. 2, Groups A, B, C, D T6
Class I, Zone 2, Group IIC T6
GLGL applied for

EMC data

DesignationElectromagnetic RF field
Standards/regulationsEN 61000-4-3
Typical deviation from the measuring range final value0.2 %
DesignationFast transients (burst)
Standards/regulationsEN 61000-4-4
Typical deviation from the measuring range final value0.1 %
DesignationConducted interferences
Standards/regulationsEN 61000-4-6
Typical deviation from the measuring range final value2.8 %

Datasheet - PDF

Title:Language:Size:Type:
PHOENIX CONTACT-2902028-MINI MCR-2-UNI-UI-UIRO-PTEnglish136 KbytesPHOENIX CONTACT-2902028-MINI MCR-2-UNI-UI-UIRO-PT

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or