Cart
0
Product
Products
(empty)
No products
$0.00
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total
View larger
IB IL 400 ELR R-3A 2727378 PHOENIX CONTACT Inline terminal
IB IL 400 ELR R-3A
2727378
PHOENIX_CONTACT
Inline terminal
I/O
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
More info
▲Key Commercial Data
| Orderkey | 2727378 |
|---|---|
| Packing unit | 1 pc |
| Catalog page | Page 186 (C-6-2017) |
| GTIN | 4017918168490 |
| Weight per Piece (excluding packing) | 500.000 g |
| Custom tariff number | 85389091 |
| Country of origin | DE (Germany) |
Ambient conditions
| Ambient temperature (operation) | -25 °C ... 55 °C |
|---|---|
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 10 % ... 85 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 85 % (non-condensing) |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 2000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Degree of protection | IP20 |
| Note | Notes on operation Line protection for the network supply line, max. 20 A. Observe derating of the POWER-COMBICON connector |
Interfaces
| Designation | Inline local bus |
|---|---|
| No. of channels | 2 |
| Connection method | Inline data jumper |
| Transmission speed | 500 kbps |
| Transmission physics | Copper |
Mains connection
| Designation | Mains connection |
|---|---|
| Connection method | Power plug |
| Designation connection point | Terminal strip X11 and X12 |
| Number of positions | 5 |
| Permissible conductor cross section | max. 2.5 mm² (L1, L2, L3, N, PE (not leading)) |
| Operating voltage | 187 V AC ... 440 V AC +0 % (conductor voltage) |
| Max. current carrying capacity | 20 A |
Motor starter, output
| Connection method | COMBICON |
|---|---|
| Number | 1 (3 phases, short-circuit-proof with external conductor protection 16 A (full-range fuse for semiconductors, type gR)) |
| 1 | |
| Output name | Motor output |
| Designation connection point | Terminal strip X10 |
| Number of positions | 4 |
| Permissible conductor cross section | 1 mm² ... 2.5 mm² |
| Operating voltage | 200 V AC ... 440 V AC |
| Frequency range | 50 Hz ... 60 Hz |
| Nominal current range | 0.2 A ... 3.6 A |
| Switching rate | Max. 30 per minute (observe derating) |
Motor monitoring
| Parameterization range | 0.2 A ... 3.6 A (steps of 50/100/200 mA, via fieldbus) |
|---|---|
| Overspeed tripping | ≥ 20 A (after 0.3 seconds) |
Motor starter, brake
| Number | 1 |
|---|---|
| Designation | Brake module (external) |
| Type of contact | Solid-state contact |
| Connection technology | COMBICON |
Inline potentials
| Designation | Communications power (UL) |
|---|---|
| Supply voltage | 7.5 V DC (via voltage jumper) |
| Current consumption | max. 45 mA |
| Power consumption | max. 0.34 W |
| Designation | Segment circuit supply (US) |
| Supply voltage | 24 V DC (via voltage jumper) |
| Supply voltage range | 19.2 V DC ... 28.8 V DC (including all tolerances, including ripple) |
| Current consumption | max. 50 mA |
| Power consumption | max. 1.2 W (entire device) |
General
| Mounting type | DIN rail |
|---|---|
| Net weight | 500 g |
| Note on weight specifications | without plug |
| Operating mode | Process data mode with one byte |
| Note | Notes on operation Line protection for the network supply line, max. 20 A. Observe derating of the POWER-COMBICON connector |
| Diagnostics messages | Overcurrent Error message in the diagnostic code (bus) and display via the LED ERR on the module |
| Output stage cannot be controlled Error message in the diagnostic code (bus) and display via the LED ERR on the module | |
| Assembly instructions | To safeguard sufficient ventilation, ensure that there is an installation clearance of a minimum of 50 cm both above and below. |
Standards and Regulations
| Mechanical tests | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 2g, evaluation criterion 1 |
|---|---|
| Shock in acc. with EN 60068-2-27/IEC 60068-2-27 10g, evaluation criterion 1 | |
| Protection class | I, IEC 61140, EN 61140, VDE 0140-1 |
Environmental Product Compliance
| China RoHS | Environmentally Friendly Use Period = 50 |
|---|---|
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
eCl@ss 4.027250309eCl@ss 4.127250309eCl@ss 5.027250304eCl@ss 5.127242600eCl@ss 6.027242600eCl@ss 7.027242609eCl@ss 8.027242609eCl@ss 9.027242609
Datasheet - PDF
▲| Title: | Size: | Type: |
|---|---|---|
| PDF CATALOG PHOENIX AUTOMATION EN.pdf | 35 Mbytes |
|
| PHOENIX CONTACT-2727378-IB IL 400 ELR R-3A | 147 Kbytes |
|
Reviews (0) ▲
No customer reviews for the moment.
Add Review
hide form
| Rating: |
|
| Name: | |
| Email: | |
| Subject: | |
| Text: | |
| Do you recommend this product to buy? | |
|
|
|
| Add review | |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.