Product successfully added to your shopping cart
DEK-REL- 24/I/1
2940171
PHOENIX_CONTACT
1
Relay Module
Industrial Relays
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2940171 |
---|---|
Packing unit | 10 pc |
Catalog page | Page 438 (C-5-2017) |
GTIN | 4017918079895 |
Weight per Piece (excluding packing) | 19.000 g |
Custom tariff number | 85364190 |
Country of origin | CN (China) |
Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
---|
Ambient temperature (operation) | -20 °C ... 50 °C |
---|---|
Ambient temperature (storage/transport) | -20 °C ... 70 °C |
Nominal input voltage UN | 24 V AC/DC |
---|---|
Input voltage range in reference to UN | 0.8 ... 1.1 |
Typical input current at UN | 6.5 mA |
Typical response time | 5 ms |
Typical release time | 15 ms |
Protective circuit | Bridge rectifier Bridge rectifier |
Operating voltage display | Yellow LED |
Power dissipation for nominal condition | 0.16 W |
Contact type | 1 N/O contact (double contact) |
---|---|
Type of switch contact | Double contact |
Contact material | AgNi, hard gold-plated |
Maximum switching voltage | 250 V AC |
125 V DC | |
Minimum switching voltage | 0.1 V |
Min. switching current | 1 mA |
Maximum inrush current | 5 A |
Limiting continuous current | 3 A (5 A up to 35°C at 24 V DC) |
Interrupting rating (ohmic load) max. | 72 W (at 24 V DC) |
60 W (at 48 V DC) | |
50 W (at 60 V DC) | |
50 W (at 110 V DC) | |
750 VA (for 250 V AC) | |
120 W (at 24 V DC - up to 35°) |
Type of note | Note on application |
---|---|
Note | Use of EB 80-DIK... bridges in the DEK terminal blocks: Absorption of humidity from the ambient air as well as an unfavorable tolerance between a larger number of DEK terminal blocks and the EB 80-DIK... bridge may cause (minor) expansion of the DEK housing. When the EB 80-DIK... bridges are used, therefore, it is recommended that these be disconnected after about 10 to 12 DEK terminal blocks and a wire bridge to the next DEK terminal block be inserted in their place. |
Test voltage relay winding/relay contact | 2 kV AC (50 Hz, 1 min.) |
Operating mode | 100% operating factor |
Mechanical service life | approx. 2x 107cycles |
Mounting position | any |
Assembly instructions | In rows with zero spacing |
Net weight (SAP) | 19 g |
Connection name | Coil side |
---|---|
Connection method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section solid | 0.2 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 14 |
Torque | 0.5 Nm |
Connection name | Contact side |
---|---|
Connection method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section solid | 0.2 mm² ... 2.5 mm² |
Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 14 |
Torque | 0.5 Nm |
Connection in acc. with standard | CUL |
---|---|
Standards/regulations | IEC 60664 |
EN 50178 | |
Insulation | Basic insulation |
Degree of pollution | 2 |
Overvoltage category | III |
China RoHS | Environmentally Friendly Use Period = 50 |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2940171-DEK-REL- 24/I/1 | 115 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.