Product successfully added to your shopping cart
REL-PR3-230AC/3X21
2903705
PHOENIX_CONTACT
1
Single relay
Industrial Relays
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2903705 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 326 (C-5-2017) |
GTIN | 4046356759175 |
Weight per Piece (excluding packing) | 84.500 g |
Custom tariff number | 85364900 |
Country of origin | PL (Poland) |
Ambient temperature (operation) | -40 °C ... 55 °C |
---|---|
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Nominal input voltage UN | 230 V AC |
---|---|
Mains frequency | 50/60 Hz |
Typical input current at UN | 12 mA |
Typical response time | 5 ms ... 25 ms (depending on phase relation) |
Typical release time range | 5 ms ... 20 ms (depending on phase relation) |
Coil resistance | 7080 Ω ±15 % |
Power dissipation for nominal condition | 2.76 W |
Contact type | 3 PDTs |
---|---|
Type of switch contact | Single contact |
Contact material | AgNi |
Maximum switching voltage | 440 V AC |
250 V DC | |
Minimum switching voltage | 10 V (At 24 mA) |
Min. switching current | 10 mA (at 24 V) |
Maximum inrush current | 50 A (20 ms, N/O contact) |
Limiting continuous current | 16 A |
Interrupting rating (ohmic load) max. | 384 W (at 24 V DC) |
124 W (at 48 V DC) | |
108 W (at 60 V DC) | |
52 W (at 110 V DC) | |
70 W (at 220 V DC) | |
4000 VA (for 250 V AC) | |
4000 VA (at 440 V AC) | |
3-phase motor load | 1500 W (at 400 V, AC3) |
Motor load according to UL 508 | 1/3 HP, 120 V AC (single-phase AC motor) |
1/2 HP, 240 V AC (single-phase AC motor) | |
1/2 HP, 240 V AC (three-phase induction motor) |
Note | The outputs are not suitable for switching different outer conductors. |
---|---|
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed. | |
Test voltage relay winding/relay contact | 2.5 kVrms(50 Hz, 1 min.) |
Test voltage PDT/PDT | 2.5 kVrms(50 Hz, 1 min.) |
Operating mode | 100% operating factor |
Degree of protection | RT I |
Mechanical service life | approx. 107cycles |
Service life, electrical | see diagram |
Mounting position | any |
Net weight (SAP) | 84.5 g |
Connection in acc. with standard | CSA |
---|---|
Standards/regulations | IEC 60664 |
IEC 61810 | |
Rated insulation voltage | 250 V AC |
Rated surge voltage | 4 kV |
Insulation | Basic insulation |
Degree of pollution | 3 |
Overvoltage category | III |
China RoHS | Environmentally friendly use period: unlimited = EFUP-e |
---|---|
No hazardous substances above threshold values |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX INTERFACE TECHNOLOGY AND SWITCHING DEVICES EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2903705-REL-PR3-230AC/3X21 | 143 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.