Product successfully added to your shopping cart
MINI-PS- 12- 24DC/24DC/1
2866284
PHOENIX_CONTACT
1
DC/DC converters
Power Supplies (PS)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Orderkey | 2866284 |
---|---|
Packing unit | 1 pc |
Catalog page | Page 256 (C-4-2017) |
GTIN | 4017918960902 |
Weight per Piece (excluding packing) | 245.700 g |
Custom tariff number | 85044030 |
Country of origin | CN (China) |
Degree of protection | IP20 |
---|---|
Ambient temperature (operation) | -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
Nominal input voltage range | 12 V DC ... 24 V DC |
---|---|
Input voltage range | 10 V DC ... 32 V DC |
Frequency range DC | 0 Hz |
Current consumption | 2.6 A (12 V DC) |
1.3 A (24 V DC) | |
Inrush surge current | < 15 A (typical) |
Mains buffering | typ. 3 ms (12 V DC) |
typ. 20 ms (24 V DC) | |
Input fuse | 6.3 A (slow-blow, internal) |
Nominal output voltage | 24 V DC ±1 % |
---|---|
Setting range of the output voltage (USet) | 22.5 V DC ... 28.5 V DC (> 24 V DC, constant capacity restricted) |
Nominal output current (IN) | 1 A (-25 °C ... 60 °C) |
Derating | 60 °C ... 70 °C (2.5%/K) |
Connection in parallel | Yes, for assembling redundant systems and increasing efficiency |
Connection in series | yes |
Residual ripple | < 30 mVPP(20 MHz) |
Output power | 24 W |
Typical response time | < 0.5 s |
Peak switching voltages nominal load | < 100 mVPP(20 MHz) |
Maximum power dissipation in no-load condition | < 1.2 W |
Power loss nominal load max. | < 5 W |
Net weight | 0.2 kg |
---|---|
Operating voltage display | Green LED |
Efficiency | > 83 % (at 24 V DC and nominal values) |
Insulation voltage input/output | 1.5 kV (type test) |
1 kV (routine test) | |
Protection class | III |
Degree of protection | IP20 |
MTBF (IEC 61709, SN 29500) | |
> 2569000 h (40 °C) | |
Mounting position | horizontal DIN rail NS 35, EN 60715 |
Assembly instructions | alignable: horizontally 0 mm, vertically 50 mm |
Connection method | Pluggable screw connection |
---|---|
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 7 mm |
Screw thread | M3 |
Connection method | Pluggable screw connection |
---|---|
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Stripping length | 7 mm |
Screw thread | M3 |
Output name | DC OK active |
---|---|
Output description | UOUT> 21.5 V: High signal |
Maximum switching voltage | ≤ 24 V DC |
Output voltage | + 24 V (Signal) |
Continuous load current | ≤ 20 mA |
Status display | "DC OK" LED green |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
Screw thread | M3 |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
---|---|
Noise emission | EN 55011 (EN 55022) |
Noise immunity | EN 61000-6-2:2005 |
Connection in acc. with standard | CUL |
Standards/regulations | EN 61000-4-2 |
Contact discharge | 8 kV (Contact discharge) |
Standards/regulations | EN 61000-4-3 |
Frequency range | 80 MHz ... 3 GHz |
Test field strength | 10 V/m |
Standards/regulations | EN 61000-4-4 |
Comments | Level 2 - asymmetrical cable to ground |
Standards/regulations | EN 61000-6-3 |
EN 61000-4-6 | |
Frequency range | 0.15 MHz ... 80 MHz (10 V) |
Standards/regulations | EN 61000-4-11 |
Low Voltage Directive | Conformance with LV directive 2006/95/EC |
Standard - Electrical safety | EN 60950-1/VDE 0805 (SELV) |
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
Standard - Safe isolation | DIN VDE 0100-410 |
DIN VDE 0106-101 | |
Shipbuilding approval | DNV GL (EMC A) |
UL approvals | UL/C-UL listed UL 508 |
UL/C-UL Recognized UL 60950-1 | |
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) | |
Rail applications | EN 50121-4 |
China RoHS | Environmentally Friendly Use Period = 25; |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX PROTECTION EN.pdf | 27 Mbytes | |
PHOENIX CONTACT-2866284-MINI-PS- 12- 24DC/24DC/1 | 131 Kbytes |
No customer reviews for the moment.
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.