Product successfully added to your shopping cart
NA111PN
NA1-11-PN
PANASONIC
1
Cross-beam area sensor, 1 m sensing range 12-24V DC, PNP
Area photoelectric sensor - PANASONIC > NA11 Cross-beam scanning system - PANASONIC
* Brand new product in its original packaging covered by the warranties and certifications provided by PANASONIC
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Product Number | NA1-11-PN |
Part Number | NA1-11-PN |
Product | Small / Slim Object Detection Area Sensor |
Details | PNP output |
Product name | Small / Slim Object Detection Area Sensor NA1-11 |
Item | Specifications |
---|---|
Product Number | NA1-11-PN |
Part Number | NA1-11-PN |
CE marking directive compliance | EMC Directive, RoHS Directive |
Sensing height | 100 mm3.937 in |
Sensing range | 0.17 to 1 m0.558 to 3.281 ft (Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) |
Element pitch | 10 mm0.394 in |
Number of emitting / receiving elements | 11 Nos. each on the emitter and the receiver, respectively |
Sensing object | ø13.5 mmø0.531 inor more opaque object (Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) |
Supply voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
Current consumption | Emitter: 80 mA or less Receiver: 100 mA or less |
Output | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
Output:Utilization category | DC-12 or DC-13 |
Output:Output operation | ON or OFF when beam channel is interrupted, selectable by operation mode switch |
Output:Short-circuit protection | Incorporated |
Response time | In Dark state: 5 ms or less In Light state: 10 ms or less |
Indicators:Emitter | Power indicator: Green LED (lights up when the power is ON) Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
Indicators:Receiver | Operation indicator: Orange LED (lights up when the output is ON) Power indicator: Green LED (lights up when the power is ON) Large indicator: Orange LED (lights up or blinks when the large indicator input is High, lighting pattern is selected by operation mode switch) |
Pollution degree | 3 (Industrial environment) |
Protection | IP62 (IEC) |
Ambient temperature | -10 to 55 ℃+14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃-4 to +158 ℉ |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Vibration resistance | 10 to 150 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
Shock resistance | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
Emitting element | Infrared LED (Peak emission wavelength: 880nm0.035mil, cross-beam scanning system) |
Material | Enclosure: Heat-resistant ABS Lens: Acrylic Indicator cover: Acrylic |
Cable | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
Cable extension | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. |
Weight | Net weight: Emitter 80 g approx., Receiver 85 g approx Gross Weight: 210 g approx. |
Title: | Size: | Type: |
---|---|---|
Datasheet 1: NA111PN - NA111PN | NA1-11-PN | 248 Kbytes | |
Download general catalog |
Rating: | |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.