2 5 W C - D C Tr i p l e O u t p u t to D e s k t o p P 2 5 - B Ts e r i e s
2 5 W C - D C Tr i p l e O u t p u t to D e s k t o p P 2 5 - B Ts e r i e s
2 5 W C - D C Tr i p l e O u t p u t to D e s k t o p P 2 5 - B Ts e r i e s
Features :
Features :
Features :
2 pole AC inlet IEC320-C8
2 pole AC inlet IEC320-C8
2 pole AC inlet IEC320-C8
Classpower (without earthpin)
Classpower (without earthpin)
Classpower (without earthpin)
Protections: short circuit / Overload / Over voltage / Over temperature. Fully enclosed plastic case
Protections: short circuit / Overload / Over voltage / Over temperature. Fully enclosed plastic case
Protections: short circuit / Overload / Over voltage / Over temperature. Fully enclosed plastic case
Fixswitchingfrequency andregulation
Fixswitchingfrequency andregulation
Fixswitchingfrequency andregulation
Topology: Top switch circuit LED indicator for power on Approvals: UL / CUL / TUV / CB / CE
Topology: Top switch circuit LED indicator for power on Approvals: UL / CUL / TUV / CB / CE
Topology: Top switch circuit LED indicator for power on Approvals: UL / CUL / TUV / CB / CE
1 yearwarranty
1 yearwarranty
1 yearwarranty
SPECIFICATION
SPECIFICATION
SPECIFICATION
ORDER NO.
ORDER NO.
ORDER NO.
T U V
T U V
T U V
R h e i n l a n d
R h e i n l a n d
R h e i n l a n d
P r o d u c t S a f e t y
P r o d u c t S a f e t y
P r o d u c t S a f e t yP25B13A-R1BP25B13D-R1BP25B14E-R1B
P25B13A-R1BP25B13D-R1BP25B14E-R1B
P25B13A-R1BP25B13D-R1BP25B14E-R1B
geprUfre
geprUfre
geprUfre
Sicherheit
Sicherheit
Sicherheit
SECURITY MODEL NO.
SECURITY MODEL NO.
SECURITY MODEL NO.
PSU25B-13A
PSU25B-13A
PSU25B-13A
PSU25B-13D
PSU25B-13D
PSU25B-13D
PSU25B-14E
PSU25B-14E
PSU25B-14E
DC VOLTAGENote.2 5V
DC VOLTAGENote.2 5V
DC VOLTAGENote.2 5V
12V
12V
12V
-5V 5V
-5V 5V
-5V 5V
12V
12V
12V
-12V5V
-12V5V
-12V5V
15V
15V
15V
-15V
-15V
-15V
RATED CURRENT CURRENT RANGE RATED POWER
RATED CURRENT CURRENT RANGE RATED POWER
RATED CURRENT CURRENT RANGE RATED POWER
2.5A0.8A
2.5A0.8A
2.5A0.8A
0.5 - 2.5 0.1 - 0.8 A
0.5 - 2.5 0.1 - 0.8 A
0.5 - 2.5 0.1 - 0.8 A
25W
25W
25W
0.3 to
0.3 to
0.3 to
0.1 - 0.3 to
0.1 - 0.3 to
0.1 - 0.3 to
2.5 A 0.8 A
2.5 A 0.8 A
2.5 A 0.8 A
0.5 - 2.5 0.1-0.8 A
0.5 - 2.5 0.1-0.8 A
0.5 - 2.5 0.1-0.8 A
25W
25W
25W
0.3 to
0.3 to
0.3 to
0.1 -0.3 A
0.1 -0.3 A
0.1 -0.3 A
2.5A0.5A
2.5A0.5A
2.5A0.5A
0.5 - 2.5A0.1 - 0.5 a
0.5 - 2.5A0.1 - 0.5 a
0.5 - 2.5A0.1 - 0.5 a
25W
25W
25W
0.3 to
0.3 to
0.3 to
0.1 - 0.3 to
0.1 - 0.3 to
0.1 - 0.3 to
OUTPUT
OUTPUT
OUTPUT
RIPPLE & NOISE (max.) Note.350mVp-p
RIPPLE & NOISE (max.) Note.350mVp-p
RIPPLE & NOISE (max.) Note.350mVp-p
VOLTAGE ADJ. RANGEFixed
VOLTAGE ADJ. RANGEFixed
VOLTAGE ADJ. RANGEFixed
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
50mVp-p
50mVp-p
50mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
50mVp-p
50mVp-p
50mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
100mVp-p
VOLTAGE TOLERANCE Note.4 5.0% 5.0% 3.0% LINE of REGULATIONNote.5 1.0% 1.0% 1.0% LOAD REGULATIONNote.6 4.0% 4.0% 2.0%
VOLTAGE TOLERANCE Note.4 5.0% 5.0% 3.0% LINE of REGULATIONNote.5 1.0% 1.0% 1.0% LOAD REGULATIONNote.6 4.0% 4.0% 2.0%
VOLTAGE TOLERANCE Note.4 5.0% 5.0% 3.0% LINE of REGULATIONNote.5 1.0% 1.0% 1.0% LOAD REGULATIONNote.6 4.0% 4.0% 2.0%
5.0%
5.0%
5.0%
1.0%
1.0%
1.0%
4.0%
4.0%
4.0%
5.0% 3.0%
5.0% 3.0%
5.0% 3.0%
1.0% 1.0%
1.0% 1.0%
1.0% 1.0%
4.0% 2.0%
4.0% 2.0%
4.0% 2.0%
5.0%
5.0%
5.0%
1.0%
1.0%
1.0%
4.0%
4.0%
4.0%
5.0% 3.0%
5.0% 3.0%
5.0% 3.0%
1.0% 1.0%
1.0% 1.0%
1.0% 1.0%
4.0% 2.0%
4.0% 2.0%
4.0% 2.0%
INPUT
INPUT
INPUT
PROTECTION
PROTECTION
PROTECTION
ENVIRONMENT
ENVIRONMENT
ENVIRONMENT
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)
AC POWER
AC POWER
AC POWER
Input CURRENT (max.) The LEAKAGE CURRENT (max.)
Input CURRENT (max.) The LEAKAGE CURRENT (max.)
Input CURRENT (max.) The LEAKAGE CURRENT (max.)OVERLOAD, OVER VOLTAGE
OVERLOAD, OVER VOLTAGE
OVERLOAD, OVER VOLTAGE
THE EXCESS OF TEMPERATURE
THE EXCESS OF TEMPERATURE
MOST OF TEMPERATUREWORKING TEMP. WORKING HUMIDITY
WORKING TEMP. WORKING HUMIDITY
WORKING TEMP. WORKING HUMIDITY
STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE
STORAGE TEMP., The MOISTURE
200 ms, 50 ms, 16ms at full load
200 ms, 50 ms, 16ms at full load
200 ms, 50 ms, 16ms at full load
90 - 264VAC135 - 370VDC
90 - 264VAC135 - 370VDC
90 - 264VAC135 - 370VDC
47 - 63Hz
47 - 63Hz
47 - 63Hz
70% 72% 74%
70% 72% 74%
70% 72% 74%
0.8 A / 100VAC
0.8 A / 100VAC
0.8 A / 100VAC
60A / 230VAC
60A / 230VAC
60A / 230VAC
0.25 mA / 240VAC
0.25 mA / 240VAC
0.25 mA / 240VAC
115 - 200% rated output power
115 - 200% rated output power
115 - 200% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed
+5V: 110 - 140% rated output voltage
+5V: 110 - 140% rated output voltage
+5V: 110 - 140% rated output voltage
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover
IC1Tj135
IC1Tj135
IC1Tj135
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
0 - +40(Refer to output load curve of power reduction)
0 - +40(Refer to output load curve of power reduction)
0 - +40(Refer to output load curve of power reduction)
20% - 90% RH non-condensing
20% - 90% RH non-condensing
20% - 90% RH non-condensing
-20 - +85 , 10% - 95% RH
-20 - +85 , 10% - 95% RH
-20 - +85 , 10% - 95% RH
TEMP. COEFFICIENT 0.03% / (0 - 50 )
TEMP. COEFFICIENT 0.03% / (0 - 50 )
TEMP. COEFFICIENT 0.03% / (0 - 50 )SAFETY AND EMC
SAFETY AND EMC
SAFETY AND EMC
(Note. 7)
(Note. 7)
(Note. 7)OTHER CONNECTOR
OTHER CONNECTOR
OTHER CONNECTOR
The VIBRATION
The VIBRATION
The VIBRATION
SAFETY STANDARDS OF STRESS RESISTANCE INSULATION RESISTANCE
SAFETY STANDARDS OF STRESS RESISTANCE INSULATION RESISTANCE
SAFETY STANDARDS OF STRESS RESISTANCE INSULATION RESISTANCE
EMI CONDUCTION AND RADIATION HARMONIC CURRENT
EMI CONDUCTION AND RADIATION HARMONIC CURRENT
EMI CONDUCTION AND RADIATION HARMONIC CURRENT
EMS IMMUNITY MTBF DIMENSION PACKING
EMS IMMUNITY MTBF DIMENSION PACKING
EMS IMMUNITY MTBF DIMENSION PACKING
PLUG
PLUG
PLUG
CABLE
CABLE
CABLE
10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
10 - 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes
UL1950, CSA22.2, EN60950-1, Approved
UL1950, CSA22.2, EN60950-1, Approved
UL1950, CSA22.2, EN60950-1, Approved
I/P-O/P:3KVAC
I/P-O/P:3KVAC
I/P-O/P:3KVAC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022(CISPR22) Class B Compliance to EN61000-3-2,3
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022(CISPR22) Class B Compliance to EN61000-3-2,3
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022(CISPR22) Class B Compliance to EN61000-3-2,3
Compliance to EN61000-4-2,3,4,5,6,11, Light industry level, criteria A
Compliance to EN61000-4-2,3,4,5,6,11, Light industry level, criteria A
Compliance to EN61000-4-2,3,4,5,6,11, Light industry level, criteria A
520k hrs min.MIL-HDBK-217F(25)
520k hrs min.MIL-HDBK-217F(25)
520k hrs min.MIL-HDBK-217F(25)
108*67*36mm (L*W*H)
108*67*36mm (L*W*H)
108*67*36mm (L*W*H)
0.3 kg ; 54pcs / 20kg / CARTON
0.3 kg ; 54pcs / 20kg / CARTON
0.3 kg ; 54pcs / 20kg / CARTON
Standard type R1B: DIN 5PINfor stock ; Other type available by customer requested
Standard type R1B: DIN 5PINfor stock ; Other type available by customer requested
Standard type R1B: DIN 5PINfor stock ; Other type available by customer requested
Standard type UL2464 18AWG*2C, 20AWG*2C with 5fts length for stock; Other type available by customer requested
Standard type UL2464 18AWG*2C, 20AWG*2C with 5fts length for stock; Other type available by customer requested
Standard type UL2464 18AWG*2C, 20AWG*2C with 5fts length for stock; Other type available by customer requestedNOTE
NOTE
NOTE 1.All the parameters arespecified at 230 vac input, ratedload,from 25 to 70% relative humidity environment.
1.All the parameters arespecified at 230 vac input, ratedload,from 25 to 70% relative humidity environment.
1.All the parameters arespecified at 230 vac input, ratedload,from 25 to 70% relative humidity environment.
2.DC voltage: The outputvoltage setat point measure by plug terminal & 50% load.
2.DC voltage: The outputvoltage setat point measure by plug terminal & 50% load.
2.DC voltage: The outputvoltage setat point measure by plug terminal & 50% load.
3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Tolerance: includes set up tolerance, line regulation, load regulation.
5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load.
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 20% to 100% ratedload.
6.Load regulation is measured from 20% to 100% ratedload.
6.Load regulation is measured from 20% to 100% ratedload.
7.The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
7.The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
7.The supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
EMC directives.
EMC directives.File name:P25B-T-SPEC 2007-03-01
File name:P25B-T-SPEC 2007-03-01
File name:P25B-T-SPEC 2007-03-01