RPT-7503 RPT7503 MEANWELL Input: 90-264 AC / 127-370 DC, Output: 3, V1: 3,3, A1: 7, V2: 5, A2: 8, V3: 12, A3.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

RPT-7503 RPT7503 MEANWELL Input: 90-264 AC / 127-370 DC, Output: 3, V1: 3,3, A1: 7, V2: 5, A2: 8, V3: 12, A3..

RPT-7503

RPT7503

MEANWELL

Available

Ship on today

Input: 90-264 AC / 127-370 DC, Output: 3, V1: 3,3, A1: 7, V2: 5, A2: 8, V3: 12, A3: 1,5

More details


Power Supplies

OPENFRAME MEDICAL

RPT

* Brand new produt in its original packing covered by the warranties and certifications provided by MEANWELL

QuantityPrice
1+$36.05
8+$32.36
16+$31.57
24+$31.17
32+$30.92
*This price is per unit and is the net value (not including taxes if applicable).

How it Works

How does this work?

1 Add the products of your choice to the shopping cart
2 Enter your contact details and submit your request
3 You will be notified by email with a quotation
4 From the quotation simply finish your order and you will receive the products

There are several options for payment
- Credit card
- Wire Transfer
- PayPal


Related products

More info



75W Tr iple Output Medical Type 75W Tr iple Output Medical Type
75W Tr iple Output Medical Type RP T -75series RP T -75series
RP T -75series Features : Features :
Features : Universal AC input / Full range Universal AC input / Full range
Universal AC input / Full range Low leakagecurrent<100A Low leakagecurrent<100A
Low leakagecurrent<100A Protections: Short circuit / Overload/ Over voltage Protections: Short circuit / Overload/ Over voltage
Protections: Short circuit / Overload/ Over voltage Free air convection for rated power and 23.5CFM forced air Free air convection for rated power and 23.5CFM forced air
Free air convection for rated power and 23.5CFM forced air convection for peak load convection for peak load
convection for peak load Medical safety approved (2 x MOPPbetweenprimaryto secondary) Medical safety approved (2 x MOPPbetweenprimaryto secondary)
Medical safety approved (2 x MOPPbetweenprimaryto secondary) Fixed switchingfrequencyat 65KHz Fixed switchingfrequencyat 65KHz
Fixed switchingfrequencyat 65KHz 3 years warranty 3 years warranty
3 years warranty SPECIFICATION SPECIFICATION
SPECIFICATION MODEL MODEL
MODEL RPT-75A RPT-75A
RPT-75A RPT-75BRPT-75C RPT-75BRPT-75C
RPT-75BRPT-75C OUTPUT NUMBER OUTPUT NUMBER
OUTPUT NUMBER CH1 CH1
CH1 CH2 CH2
CH2 CH3 CH3
CH3 CH1 CH1
CH1 CH2 CH2
CH2 CH3 CH3
CH3 CH1 CH1
CH1 CH2 CH2
CH2 CH3 CH3
CH3 DC VOLTAGE DC VOLTAGE
DC VOLTAGE 5V12V 5V12V
5V12V -5V5V -5V5V
-5V5V 12V -12V5V 12V -12V5V
12V -12V5V 15V -15V 15V -15V
15V -15V RATED CURRENT CURRENT RANGE RATED POWER RATED CURRENT CURRENT RANGE RATED POWER
RATED CURRENT CURRENT RANGE RATED POWER PEAK LOAD (23.5CFM) PEAK LOAD (23.5CFM)
PEAK LOAD (23.5CFM) 6A 6A
6A 0.6 ~ 8A 0.6 ~ 8A
0.6 ~ 8A 68.5W 68.5W
68.5W 93W 93W
93W 3A 3A
3A 0.2 ~ 4A 0.2 ~ 4A
0.2 ~ 4A 0.5A 0.5A
0.5A 0.1 ~ 1A 0.1 ~ 1A
0.1 ~ 1A 6A 6A
6A 0.6 ~ 8A 0.6 ~ 8A
0.6 ~ 8A 72W 72W
72W 100W 100W
100W 3A 3A
3A 0.2 ~ 4A 0.2 ~ 4A
0.2 ~ 4A 0.5A 0.5A
0.5A 0.1 ~ 1A 0.1 ~ 1A
0.1 ~ 1A 6A 6A
6A 0.6 ~ 8A 0.6 ~ 8A
0.6 ~ 8A 72W 72W
72W 100W 100W
100W 2.3A 2.3A
2.3A 0.1 ~ 3A 0.1 ~ 3A
0.1 ~ 3A 0.5A 0.5A
0.5A 0.1 ~ 1A 0.1 ~ 1A
0.1 ~ 1AOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2 80mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p
RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p
120mVp-p 120mVp-p 80mVp-p 80mVp-p
80mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p
120mVp-p 120mVp-p 80mVp-p 80mVp-p
80mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p
150mVp-p 150mVp-p VOLTAGE ADJ. RANGE VOLTAGE ADJ. RANGE
VOLTAGE ADJ. RANGE CH1:4.75 ~ 5.5V CH1:4.75 ~ 5.5V
CH1:4.75 ~ 5.5V VOLTAGE TOLERANCE Note.32.0% VOLTAGE TOLERANCE Note.32.0%
VOLTAGE TOLERANCE Note.32.0% 6.0%5.0% 6.0%5.0%
6.0%5.0% 2.0% 2.0%
2.0% 6.0%5.0% 6.0%5.0%
6.0%5.0% 2.0% 2.0%
2.0% 8.0%5.0% 8.0%5.0%
8.0%5.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATION
LINE REGULATION LOAD REGULATION 0.5% 0.5%
0.5% 1.5% 1.5%
1.5% 1.0%1.0% 1.0%1.0%
1.0%1.0% 3.0%1.0% 3.0%1.0%
3.0%1.0% 0.5% 0.5%
0.5% 1.5% 1.5%
1.5% 1.0%1.0% 1.0%1.0%
1.0%1.0% 3.0%1.0% 3.0%1.0%
3.0%1.0% 0.5% 0.5%
0.5% 1.5% 1.5%
1.5% 1.0%1.0% 1.0%1.0%
1.0%1.0% 3.0%1.0% 3.0%1.0%
3.0%1.0% SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE
SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE FREQUENCY RANGE
FREQUENCY RANGE 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load 80ms/230VAC20ms/115VAC at full load 80ms/230VAC20ms/115VAC at full load
80ms/230VAC20ms/115VAC at full load 90 ~ 264VAC 127 ~ 370VDC 90 ~ 264VAC 127 ~ 370VDC
90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63HzINPUT INPUT
INPUT EFFICIENCY(Typ.) AC CURRENT (Typ.) EFFICIENCY(Typ.) AC CURRENT (Typ.)
EFFICIENCY(Typ.) AC CURRENT (Typ.) 76% 76%
76% 1.5A/115VAC1A/230VAC 1.5A/115VAC1A/230VAC
1.5A/115VAC1A/230VAC 77%77% 77%77%
77%77% PROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENT INRUSH CURRENT (Typ.) LEAKAGE CURRENTNote.7 INRUSH CURRENT (Typ.) LEAKAGE CURRENTNote.7
INRUSH CURRENT (Typ.) LEAKAGE CURRENTNote.7OVERLOAD OVERLOAD
OVERLOAD OVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.
OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY STANDARDS
SAFETY STANDARDS COLD START 25A/115VAC 50A/230VAC COLD START 25A/115VAC 50A/230VAC
COLD START 25A/115VAC 50A/230VAC Earth leakage current < 150 A/264VAC , Touch current < 100 A/264VAC Earth leakage current < 150 A/264VAC , Touch current < 100 A/264VAC
Earth leakage current < 150 A/264VAC , Touch current < 100 A/264VAC 140 ~ 180% rated output power 140 ~ 180% rated output power
140 ~ 180% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V CH1: 5.75 ~ 6.75V
CH1: 5.75 ~ 6.75V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover -20 ~ +70c (Refer to "Derating Curve") -20 ~ +70c (Refer to "Derating Curve")
-20 ~ +70c (Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +85c, 10 ~ 95% RH -40 ~ +85c, 10 ~ 95% RH
-40 ~ +85c, 10 ~ 95% RH 0.03%/c (0 ~ 45c) 0.03%/c (0 ~ 45c)
0.03%/c (0 ~ 45c) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved
ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved SAFETY & SAFETY &
SAFETY & ISOLATION LEVELPrimary-Secondary:2xMOPP, Primary-Earth:1xMOPP ISOLATION LEVELPrimary-Secondary:2xMOPP, Primary-Earth:1xMOPP
ISOLATION LEVELPrimary-Secondary:2xMOPP, Primary-Earth:1xMOPP EMC EMC
EMC (Note 4) (Note 4)
(Note 4) OTHERS OTHERS
OTHERS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSION
EMC IMMUNITY MTBF DIMENSION PACKING PACKING
PACKING I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5KVAC
I/P-O/P:4KVAC I/P-FG:2KVACO/P-FG:1.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61000-6-2, EN61204-3, heavy industry level, EN61204-3 medical level, criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61000-6-2, EN61204-3, heavy industry level, EN61204-3 medical level, criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61000-6-2, EN61204-3, heavy industry level, EN61204-3 medical level, criteria A 521.2K hrs min.MIL-HDBK-217F (25c) 521.2K hrs min.MIL-HDBK-217F (25c)
521.2K hrs min.MIL-HDBK-217F (25c) 127*76.2*31mm (L*W*H) 127*76.2*31mm (L*W*H)
127*76.2*31mm (L*W*H) 0.26Kg; 63pcs/17.4Kg/1.35CUFT 0.26Kg; 63pcs/17.4Kg/1.35CUFT
0.26Kg; 63pcs/17.4Kg/1.35CUFTNOTE NOTE
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25c of ambient temperature. 1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25c of ambient temperature.
1. All parameters NOT specially mentioned are measured at 230VAC input, ratedload and 25c of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies."
EMC directives. For guidance on how to performthese EMC tests, please refer to "EMI testingof component powersupplies." (asavailable on http://www.meanwell.com) (asavailable on http://www.meanwell.com)
(asavailable on http://www.meanwell.com) 5. Lengthof set up time is measured at cold first start.Turning ON/OFF the powersupply may lead to increase of the set up time. 5. Lengthof set up time is measured at cold first start.Turning ON/OFF the powersupply may lead to increase of the set up time.
5. Lengthof set up time is measured at cold first start.Turning ON/OFF the powersupply may lead to increase of the set up time. 6. HeatSink HS1,HS2,HS3 can not be shorted. 6. HeatSink HS1,HS2,HS3 can not be shorted.
6. HeatSink HS1,HS2,HS3 can not be shorted. 7. Touch currentwas measured from primary input to DC output. 7. Touch currentwas measured from primary input to DC output.
7. Touch currentwas measured from primary input to DC output.File Name:RPT-75-SPEC2015-07-17 File Name:RPT-75-SPEC2015-07-17
File Name:RPT-75-SPEC2015-07-17

Datasheet - PDF

Title:Language:Size:Type:
pdf-Input: 90-264 AC / 127-370 DC, Output: 3, V1: 3,3, A1: 7, V2: 5, A2: 8, V3: 12, A - MEANWELL - RPT-7503 - English158 Kbytespdf-Input: 90-264 AC / 127-370 DC, Output: 3, V1: 3,3, A1: 7, V2: 5, A2: 8, V3: 12, A - MEANWELL - RPT-7503 -

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review
Have you got any questions?

If you have any questions, you can visit the following links or contact us via email

Please wait





* Required fields

or