As the double door version of MCSS, the MCDS offers the same improved design, strength and corrosion resistance. Can be used as a stand alone system or suited together by the use of baying brackets. Intended for harsh environments such as the food and chemical industries, outdoor applications and marine environments.
Mounting Plate Height
Mounting Plate Width
Part No. AISI 304
Part No. AISI 316L
AISI 304 pre-grained stainless seel / AISI 316L. Frame: 1.5 mm. Door: 2 mm. Rear, roof and side panels: 1.5 mm. Bottom plates: 1.5 mm stainless steel. Mounting plate: 3 mm galvanized steel.
Seam welded reversed open profiles with 25 mm hole pattern according to DIN 43660.
Mounted with four hinges. Including door frame with 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left hand door locking.
Fitted by M6 torx screws. Standard facilities for rear door mounting. Split rear panels in 1600 mm wide enclosures.
Supplied as an accessory.
Espagnolette 4-point locking system. Does not interfere with the enclosure inner space. Standard double-bit 3 mm insert. Can be exchanged for standard inserts or Euro-cylinder and swing handle.
Two pieces of bottom plate in 1200 and 1600 mm width with injected polyurethane gasket to ensure maximum sealing.
Double folded and adjustable in depth by steps of 25 mm with the MPD02 accessory. Mounting plate is delivered attached on the outside of the enclosure packaging.
All panels are earthed through their fittings and are equipped with a separate earthing stud.
Standard delivery ready for combined installation. For stand-alone installation add side panels.
Frame with fitted doors, rear panel, roof panel, bottom plates, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow suiting without removal. Packing material is recyclable.