BSE-MAG CARLO GAVAZZI Selected parameters Others TYPE Magnet sensor HOUSING Ø11x68 POWER SUPPLY Bus-powered ..

Transmitter with Magnetic Prox. Switch Function
BSE-MAG
ABS housing, cylindricalØ11 housing
Sensing distance: 8 mm
Supplied by smart-house
1.5 m. cable
Channel coding by BGP-COD-BAT with ADAPT 1605
GENERAL SPECIFICATIONS
Environment
Degreeof protection IP 67
Pollutiondegree 3 (IEC 60664)
Operating temperature -20° to +50°C (-4° to +122°F) Storage temperature-20° to +70°C (-4° to +158°F)
Mechanical resistance
Shock15 G (11 ms) Vibration 2 G (6 to 55 Hz)
Material
HousingPBT VALOX 325M BackPBT VALOX 325M Front PBT VALOX 325M Cable typePVC, grey, oil proof,
4 x 34 mm2
Cable length 1.5 m
Weight 40 g
INPUT SPECIFICATIONS
REDUCTION FACTORS
Inputs Magneticproximity switch
Nominalsensing distanceSn8 mm
Operating sensing distanceSa5 mm ≤Sa ≤ 15 mm
Release distance ≤ 30 mm
Response time≤ 1 pulse train
The nominal sensing distance is reduced by the use of metal and alloys otherthanST 37. Most importantreduction factors for the inductive proximity switch are:
Stainless steel0.6 x Sn Brass0.4 x Sn Aluminium 0.3 x Sn Copper0.2 x Sn
SUPPLY SPECIFICATIONS
Power supply Suppliedby smart-house
Reverse polarity protection Yes
Rated operational current Typ. 550 µA
TYPE SELECTION
HousingNominal sensing Ordering no. 1 channel
diameter distance (Sn)magnet-operated proximity switch
Ø 11 mm 8 mm BSE-MAG
MODE OF OPERATION
WIRING DIAGRAM
TheBSE-MAGis anordinarymagnetic proximityswitch,butwith
a built-in smart-house transmitter.
Oncea magnetis broughtwithinsensingdistanceof themagnetic proximity switch, the channel in questionis activated.
Whenthe distancebetween magnetand transmitterexceeds30 mm, the channel in questionis deactivated.
Several transmitters codedto the same channel may be used within an application. In this case the channel turns ON if one of the connected magneticproximity switchesis activated.
It is necessaryto use the wire adapterbox, ADAPT 1605, together with the programming unit, BGP-COD-BAT, in order to program the channel.
Note:
After programming, the white, black and blue wires must be connect- ed to smart-house ground.
Brown
D + D -
Blue
White
Black
Specificationsare subjectto changewithoutnotice(12.09.2007) - A productof the CARLO GAVAZZI Group