BDG-WLS4 CARLO GAVAZZI Selected parameters Others TYPE Input module HOUSING 51 x 35 x 15 POWER SUPPLY Batter..

Wireless Input Module
BDG-WLS4
smart-house wireless transmitter for building automation applications
4 individually programmable inputs
3 V battery supply (CR2032)
Channel programming using BGP-COD-BAT Compact housing
Range up to 100 m in open air
Battery life: up to 5 years at normal use
INPUT SPECIFICATIONS
Wireless inputs
Transmission frequency868 MHz
SUPPLY SPECIFICATIONS
Power supply Battery: CR2032
GENERAL SPECIFICATIONS
Channel codingVia BGP-COD-BAT and special cable: GAP-TPH-CAB. Following installation, the pro- gramming can be changed by removing the multiconnector and using the supplied adapter
for the GAP-TPH-CAB cable.
Environment
Protection degree IP 20
Pollution degree 3 (IEC 60664)
Operating temperature 0-50°C/32-122°F Storage temperature -20-70°C/-4-158°F
HousingCompact Humidity (non-condensing)20 - 80%Weight50 g – without battery Dimensions51 x 35 x 15 mm
(including frame)
MODE OF OPERATION
The BDG-WLS4 input module is designed for base unit BH4- WBUx-230 and will only function with this unit.
The wireless BDG-WLS4 input modules are programmed as standard input modules BDB- INCON4 using a BGP-COD-BAT (see data sheet for this unit).
Thecommunicationbetween
BDG-WLS4 input modules and the BH4-WBUx-230 base is establish- ed in the following way:
- Push the “Mode” button on the BH4-WBUx-230 base until the red LED indicates association.
-Activate a channel on the BDG-WLS4 input module that you want to associate with the BH4- WBUx-230 base.
It is possible to disable the commu- nication between the BH4-WBUx-
230 base and all the modules with which it is associated.
- Push the “Mode” button on the BH4-WBUx-230 base until the red “Disable” LED is lit.
This means that there is no con- nection between the BH4-WBUx-
230 base and its associations.
To reestablish the connection, push “Mode” until neither “Associate” or “Deactivate” are lit. Under normal circumstances, the “Supply” and “smart-house” LEDs will be lit continuously, whereas the LED for “Communication” only blinks briefly when you push an associated BDG-WLS4 input module.
COMMUNICATION EXAMPLE
DIMENSIONS/LED ALLOCATION
smart-house
1 2 3 4 5
Yellow, Input 4
Orange, Input 3
Red, Input 2
Brown, Input 1
Black, COM
1 2 BH8-CTRLZx
1 2BH4-WBUx-230
Antenna
BDG-WLS4
1 2 3 4 5
35
Mode
Antenna 15
Power
smart-house
RF
51
Associate
Disable
TYPE SELECTION
Supply Ordering no.
Battery supply BDG-WLS4
ACCESSORIES
Programming cable
to BGP-COD-BAT GAP-TPH-CAB
Specifications are subject to change without notice (30.04.2009) - A product of the CARLO GAVAZZI Group