UA50-30-00 1SBL351022R1700 ABB UA50-30-00 28V 50Hz / 32V 60Hz Contactor View larger
Images are for illustrative purposes only. Please refer to data sheet for details.

UA50-30-00 1SBL351022R1700 ABB UA50-30-00 28V 50Hz / 32V 60Hz Contactor

UA50-30-00

1SBL351022R1700

ABB

UA50-30-00 28V 50Hz / 32V 60Hz Contactor

More details


Low-voltage industrial components > Capacitor contactor

Contactors and overload relays > Contactors "A" FRCTLP

* Brand new product in its original packaging covered by the warranties and certifications provided by ABB

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

More info



UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles: 3 main poles - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

Ordering

Minimum Order Quantity: 1 piece
Customs Tariff Number: 85364900

Popular Downloads

Data Sheet, Technical Information: 1SBC101140C0203
Instructions and Manuals: FPTC407700P0003

Dimensions

Product Net Width: 70 mm
Product Net Depth / Length: 108 mm
Product Net Height: 110 mm
Product Net Weight: 1.160 kg

Technical

Number of Main Contacts NO: 3
Number of Main Contacts NC: 0
Number of Auxiliary Contacts NO: 0
Number of Auxiliary Contacts NC: 0
Rated Operational Voltage: Main Circuit 690 V
Maximum Breaking Capacity: cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 1300 A
cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 630 A
Rated Insulation Voltage (Ui): acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 1000 V
acc. to UL/CSA 600 V
Rated Impulse Withstand Voltage (Uimp): 8 kV
Maximum Mechanical Switching Frequency: 3600 cycles per hour
Rated Control Circuit Voltage (Uc): 50 Hz 28 V
60 Hz 32 V
Coil Consumption: Pull-in at Max. Rated Control Circuit Voltage 50 Hz 180 V·A
Pull-in at Max. Rated Control Circuit Voltage 60 Hz 210 V·A
Holding at Max. Rated Control Circuit Voltage 60 Hz 18 V·A
Holding at Max. Rated Control Circuit Voltage 60 Hz 5.5 W
Holding at Max. Rated Control Circuit Voltage 50 Hz 18 V·A
Holding at Max. Rated Control Circuit Voltage 50 Hz 5.5 W
Average Holding Value 50 / 60 Hz 18 V·A
Average Holding Value 50 / 60 Hz 5.5 W
Average Pull-in Value 50 Hz 180 V·A
Average Pull-in Value 60 Hz 210 V·A
Operate Time: Between Coil Energization and NO Contact Closing 8 ... 27 ms
Between Coil De-energization and NO Contact Opening 4 ... 11 ms
Connecting Capacity Main Circuit: Flexible with Cable End 6 ... 16 mm²
Rigid Cable 6 ... 25 mm²
Connecting Capacity Auxiliary Circuit: Flexible with Cable End 0.75 ... 2.5 mm²
Rigid Cable 1 ... 4 mm²
Degree of Protection: acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP10
Connecting terminals (delivered in open position) Main poles: M 6 (+,-) pozidriv 2 screws with 1x (13 x 10 mm) connector
Terminal Type: Screw Terminals

Environmental

Ambient Air Temperature: Near Contactor for Operation in Free Air (0.85 ... 1.1 Uc) -40 ... +55 °C
Near Contactor for Operation in Free Air (Uc) -40 ... +70 °C
Close to Contactor for Storage -60 ... +80 °C
Climatic Withstand: acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
Maximum Operating Altitude Permissible: 3000 m

Certificates and Declarations (Document Number)

CB Certificate: CB_FR2880_60002378
CSA Certificate: CSA_1033838_LR056745
Declaration of Conformity - CE: 1SBD250805U1000
EAC Certificate: EAC_RU C-FR ME77 B01010
Environmental Information: 1SBD250029E1000
GOST Certificate: GOST_POCCFRME77B07175
Instructions and Manuals: FPTC407700P0003
RoHS Information: 1SBD350079R1000
UL Certificate: UL_20120830-E312527-10-1
UL Listing Card: UL_E312527

Container Information

Package Level 1 Units: 1 piece
Package Level 1 Width: 140 mm
Package Level 1 Depth / Length: 146 mm
Package Level 1 Height: 96 mm
Package Level 1 Gross Weight: 1.16 kg
Package Level 1 EAN: 3471522084170
Package Level 2 Units: 20 piece
Package Level 2 Gross Weight: 23.2 kg
Package Level 3 Units: 160 piece

Classifications

Object Classification Code: Q
ETIM 4: EC001079 - Capacitor magnet contactor
ETIM 5: EC001079 - Capacitor magnet contactor
ETIM 6: EC001079 - Capacitor contactor
UNSPSC: 39121529

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.