Produkt wurde in den Korb gelegt
E6CP-AG5C 256 5M
E6CP1010A
E6CPAG5C2565M
OMRON
1
Verfügbar Schiff am heute
Drehgeber > E6CP
* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von OMRON
Danke für Ihr Interesse an unseren Produkten, wir hoffen die Lieferzeit ist ok.
Während der Bestellung können Sie den für Sie bestmöglichen Versand wählen: Express 24h, Standard 48h/72h, etc.
Kostengünstiger Encoder mit einem Durchmesser von 50 mm.
Note:When connecting to the H8PS, use the E6CP-AG5C-C, which is connected using a connector. It cannot be used on other models.
Current consumption1 | ||||
Maximum response frequency2 | ||||
Output code incremented by CW (as viewed from the end of the shaft) | ||||
1 μs max. (Control output voltage: 16 V, Load resistance: 1 kΩ, Output cable: 2 m max.) | ||||
Operating: −10 to 55°C (with no icing), Storage: −25 to 85°C (with no icing) | ||||
200 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
500 VAC, 50/60 Hz for 1 min between current-carrying parts and case | ||||
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
Destruction: 1,000 m/s2 3 times each in X, Y, and Z directions | ||||
Degree of protection3 | ||||
Case: ABS, Main unit: PPS, Shaft: SUS416, Mounting Bracket: Galvanized iron | ||||
Coupling (excluding Connector Models), Servo Mounting Bracket, Hexagonal wrench (excluding Connector Models), Instruction manual |
1.An inrush current of approximately 8 A will flow for approximately 0.3 ms when the power is turned ON.
Titel: | Größe: | Typ: |
---|---|---|
E6CP-AG5C 256 5M E6CPAG5C2565M E6CP1010A e6cp_a_datasheet_en.pdf | 700 Kbytes |
Es gibt keine Produktbewertungenvor.
Wertung: | |
Name: | |
E-Mail : | |
Betreff: | |
Text: | |
Haben Sie dieses Produkt empfehlen zu kaufen? | |
Bewertung abgeben |
Alle Bewertungen wir von den Einzelteilen erhalten wir anbieten, sind real und verifiziert. Eine kleine Geste, aber sehr wertvoll. Also danke für die Minute, die Sie in, dass Sie uns Ihre Meinung und Bewertung von Produkten ausgeben, weil es mir hilft, weiter zu verbessern und noch mehr Servicequalität zu bieten.