LPH-18-36 LPH1836 MEANWELL Eingang: 180-264 AC / 254-370 DC, Ausgabe: 1, V1: 36, A1: 0,5 Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

LPH-18-36 LPH1836 MEANWELL Eingang: 180-264 AC / 254-370 DC, Ausgabe: 1, V1: 36, A1: 0,5

LPH-18-36

LPH1836

MEANWELL

Verfügbar

Schiff am heute

Eingang: 180-264 AC / 254-370 DC, Ausgabe: 1, V1: 36, A1: 0,5

Mehr Infos


Spannungsversorgungen

LED-Treiber

LPH

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von MEANWELL

*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wie es funktioniert

Wie funktioniert das?

1 Fügen Sie die Produkte Ihrer Wahl in den Warenkorb
2 Geben Sie Ihre Kontaktdaten und senden Sie Ihre Anfrage
3 Sie werden per E-Mail mit unseren Preisvorschläge mitzuteilen
4 Beenden Sie einfach Ihre Bestellung und Sie erhalten die Produkte

Es gibt verschiedene Möglichkeiten die Zahlung abzuwickeln
- Kreditkarte
- Banküberweisung
- PayPal


Verwandte Produkte

Mehr Infos



18W Single Output Switching Power Supply 18W Single Output Switching Power Supply
18W Single Output Switching Power Supply LPH-18 series LPH-18 series
LPH-18 series Features : Features :
Features : 180-264VACinput only 180-264VACinput only
180-264VACinput only Fully encapsulated with IP67 level (Note.5) Fully encapsulated with IP67 level (Note.5)
Fully encapsulated with IP67 level (Note.5) Protections:Short circuit / Overload / Over voltage/ Over temperature Protections:Short circuit / Overload / Over voltage/ Over temperature
Protections:Short circuit / Overload / Over voltage/ Over temperature Cooling by free air convection Cooling by free air convection
Cooling by free air convection Classpower unit, no FG Classpower unit, no FG
Classpower unit, no FG Pass LPS Pass LPS
Pass LPS 100% full load burn-in test 100% full load burn-in test
100% full load burn-in test Suitable for LED lighting and moving sign applications Suitable for LED lighting and moving sign applications
Suitable for LED lighting and moving sign applications High reliability / Low cost High reliability / Low cost
High reliability / Low cost 2 years warranty 2 years warranty
2 years warrantySPECIFICATION SPECIFICATION
SPECIFICATION MODEL LPH-18-12 MODEL LPH-18-12
MODEL LPH-18-12LPH-18-24 LPH-18-24
LPH-18-24LPS LPS
LPSIP67 IP67
IP67LPH-18-36 LPH-18-36
LPH-18-36 DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER 12V 12V
12V 1.5A 1.5A
1.5A 0 ~ 1.5A 0 ~ 1.5A
0 ~ 1.5A 18W 18W
18W 24V 24V
24V 0.75A 0.75A
0.75A 0 ~ 0.75A 0 ~ 0.75A
0 ~ 0.75A 18W 18W
18W 36V 36V
36V 0.5A 0.5A
0.5A 0 ~ 0.5A 0 ~ 0.5A
0 ~ 0.5A 18W 18W
18WOUTPUT OUTPUT
OUTPUT RIPPLE & NOISE (max.) Note.2 120mVp-p RIPPLE & NOISE (max.) Note.2 120mVp-p
RIPPLE & NOISE (max.) Note.2 120mVp-p VOLTAGE TOLERANCE Note.33.0% VOLTAGE TOLERANCE Note.33.0%
VOLTAGE TOLERANCE Note.33.0% 150mVp-p 150mVp-p
150mVp-p 200mVp-p 200mVp-p
200mVp-p LINE REGULATION LOAD REGULATION SETUP, RISE TIME LINE REGULATION LOAD REGULATION SETUP, RISE TIME
LINE REGULATION LOAD REGULATION SETUP, RISE TIME 1.0% 1.0%
1.0% 2.0% 2.0%
2.0% 1500ms, 30ms / 230VAC 1500ms, 30ms / 230VAC
1500ms, 30ms / 230VAC HOLD UP TIME (Typ.) 50ms/230VAC at full load HOLD UP TIME (Typ.) 50ms/230VAC at full load
HOLD UP TIME (Typ.) 50ms/230VAC at full loadINPUT INPUT
INPUT PROTECTION PROTECTION
PROTECTION ENVIRONMENT ENVIRONMENT
ENVIRONMENTSAFETY & EMC SAFETY & EMC
SAFETY & EMC (Note 4) (Note 4)
(Note 4) OTHERS OTHERS
OTHERS VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.)
VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) AC CURRENT AC CURRENT
AC CURRENT INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A
INRUSH CURRENT(Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER CIRCUIT BREAKER
CIRCUIT BREAKER LEAKAGE CURRENT OVERLOAD LEAKAGE CURRENT OVERLOAD
LEAKAGE CURRENT OVERLOADOVER VOLTAGE OVER VOLTAGE
OVER VOLTAGEOVER TEMPERATURE WORKING TEMP. OVER TEMPERATURE WORKING TEMP.
OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY WORKING HUMIDITY
WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION
STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION
SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY EMC IMMUNITY
EMC IMMUNITY MTBF DIMENSION PACKING MTBF DIMENSION PACKING
MTBF DIMENSION PACKING 180 ~ 264VAC254 ~ 370VDC 180 ~ 264VAC254 ~ 370VDC
180 ~ 264VAC254 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz
47 ~ 63Hz 77%82%83% 77%82%83%
77%82%83% 0.3A/230VAC 0.3A/230VAC
0.3A/230VAC COLD START 50A(twidth=155s measured at 50% Ipeak) at 230VAC COLD START 50A(twidth=155s measured at 50% Ipeak) at 230VAC
COLD START 50A(twidth=155s measured at 50% Ipeak) at 230VAC17 units (circuit breaker of type B) / 28 units (circuit breaker of type C) at 230VAC 17 units (circuit breaker of type B) / 28 units (circuit breaker of type C) at 230VAC
17 units (circuit breaker of type B) / 28 units (circuit breaker of type C) at 230VAC0.25mA / 240VAC 0.25mA / 240VAC
0.25mA / 240VAC Above 105% rated output power Above 105% rated output power
Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed
Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.8~ 16.2V 27.6~ 32.4V 41.4 ~ 48.6V Protection type : Shut off o/p voltage, clamping by zener diode 13.8~ 16.2V 27.6~ 32.4V 41.4 ~ 48.6V Protection type : Shut off o/p voltage, clamping by zener diode
13.8~ 16.2V 27.6~ 32.4V 41.4 ~ 48.6V Protection type : Shut off o/p voltage, clamping by zener diode Hiccup mode, recovers automatically after temperature goes down Hiccup mode, recovers automatically after temperature goes down
Hiccup mode, recovers automatically after temperature goes down -30~ +70 (Refer to "Derating Curve") -30~ +70 (Refer to "Derating Curve")
-30~ +70 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing
20 ~ 90% RH non-condensing -40 ~ +80, 10 ~ 95% RH -40 ~ +80, 10 ~ 95% RH
-40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) 0.03%/ (0 ~ 50)
0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes TUV EN60950-1, IP67 approved; design refer to UL1310 Class 2,CAN/CSA No. 223-M91 TUV EN60950-1, IP67 approved; design refer to UL1310 Class 2,CAN/CSA No. 223-M91
TUV EN60950-1, IP67 approved; design refer to UL1310 Class 2,CAN/CSA No. 223-M91 I/P-O/P:3KVAC I/P-O/P:3KVAC
I/P-O/P:3KVAC I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH
I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A 1200.6K hrs min.MIL-HDBK-217F (25) 1200.6K hrs min.MIL-HDBK-217F (25)
1200.6K hrs min.MIL-HDBK-217F (25) 140*30*22(L*W*H) 140*30*22(L*W*H)
140*30*22(L*W*H) 0.175Kg; 70pcs/13.3Kgs/0.71CUFT 0.175Kg; 70pcs/13.3Kgs/0.71CUFT
0.175Kg; 70pcs/13.3Kgs/0.71CUFTNOTE NOTE
NOTE 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.
1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.
3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 4. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.
4. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 5. Suitable for indoor useor outdoorusewithout direct sunlightexposure. 5. Suitable for indoor useor outdoorusewithout direct sunlightexposure.
5. Suitable for indoor useor outdoorusewithout direct sunlightexposure. 6. The unit might not be suitable for lighting applications in EU countries. Please checkwith your local authorities for the possible useof the unit. 6. The unit might not be suitable for lighting applications in EU countries. Please checkwith your local authorities for the possible useof the unit.
6. The unit might not be suitable for lighting applications in EU countries. Please checkwith your local authorities for the possible useof the unit.File Name: LPH-18-SPEC2016-02-17 File Name: LPH-18-SPEC2016-02-17
File Name: LPH-18-SPEC2016-02-17

Datasheet - PDF

Title:Language:Size:Type:
pdf-Eingang: 180-264 AC / 254-370 DC, Ausgabe: 1, V1: 36, A1: 0,5 - MEANWELL - LPH-18-36 - LPH1836English128 Kbytespdf-Eingang: 180-264 AC / 254-370 DC, Ausgabe: 1, V1: 36, A1: 0,5 - MEANWELL - LPH-18-36 - LPH1836

Bewertungen (0)

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
  Captcha
  Bewertung abgeben
Sie verwirrt?

Wenn Sie Fragen Kauf haben, können Sie die folgenden Links oder E-Mail

Bitte warten





* Pflichtfelder

oder