Produkt wurde in den Korb gelegt
G34910000115
CARLO GAVAZZI
1
Ausgwählte Kriterien Modultyp Interface/Gateway Gehäuse DIN-Schiene Stromversorgung AC I/O Typ nicht Anzahl der I/O 2 Sonstiges Modultyp Seriell Optical Interface Gehäuse H4 (W72) I/O Typ nicht Stromversorgung 115 VAC Haupteigenschaften AC-Versorgung Opto-Interface seriell mit optolink Protokoll
Home > CARLO GAVAZZI
* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von CARLO GAVAZZI
Danke für Ihr Interesse an unseren Produkten, wir hoffen die Lieferzeit ist ok.
Während der Bestellung können Sie den für Sie bestmöglichen Versand wählen: Express 24h, Standard 48h/72h, etc.
Fiber Optic Interface
Type G 3491 0000
Du line®
Fieldbus Installationbus
• Dupline® to fibre optics interface
• Computer to Dupline® network access
• Fibre optic LAN-ring for up to 63 Dupline® systems
• Galvanic isolation 4000 VAC
• Watchdog output
• For mounting on DIN-rail (EN50022)
• LED-indications for supply, Dupline® and fail
• AC power supply
Product Description Ordering Key
G 3491 0000 230
Dupline® interface for signal transmission via fibre optics. For applications in environ- ments with high noise tran-
sients, for signal transmission in explosive areas or for con- nections of up to 63 auto- nomous Dupline® installations in a fibre optics LAN.
Type: Dupline® Type number Power supply
Type Selection
Supply Ordering no.
24 VAC G 3491 0000 024
115 VAC G 3491 0000 115
230 VAC G 3491 0000 230
Input/Output Specifications
Fibre optics interface
Material Polymer
Type Dtep-index
Max. loss 220 dB/km (660 nm) Typical loss 190 dB/km (660 nm) Numerical aperture 0.47
Dimensions 2.2 ± 0.1 mm Cable length £ 50 m Connector type 2 sockets
Hewlett Packard types HFBR-4513 (blue) HFBR-4503 (black)
Output 1 NPN transistor Function Watchdog Output voltage £ 35 VDC
Output current £ 100 mA Output voltage drop £ 2 V
Off-state leakage current £ 100 µA Short-circuit protection None Built-in protective diodes None Dielectric voltage
Output - Dupline® ³ 4 kVAC (rms)
Inductive loads External noise suppression required
Settings
Device no. 6 DIP-switches
Baudrate DIP-switch
Test mode DIP-switch
Supply Specifications
Power supply Overvoltage cat. III (IEC 60664) Rated operational voltage
through term. 21 & 22 230 230 VAC ± 15% (IEC 60038)
115 115 VAC ± 15% (IEC 60038)
024 24 VAC ± 15% (IEC 60038) Frequency 45 to 65 Hz
Rated operational power Typ. 3 W Power dissipation £ 4 W Rated impulse withstand
voltage 230 4 kV
115 2.5 kV
024 800 V Dielectric voltage
Supply-RS232C ³ 4 kVAC (rms)
General Specifications
Power ON delay < 200 ms
Indication for
Supply ON LED, green Dupline® carrier LED, yellow Fail LED, red
Environment
Degree of protection IP 20
Pollution degree 3 (IEC 60664)
Operating temperature 0° to +50°C (+32° to +122°F) Storage temperature -20° to +85°C (-4° to +185°F)
Humidity (non-condensing) 20 to 80% RH
Mechanical resistance
Shock 15 G (11 ms) Vibration 2 G (6 to 55 Hz)
Dimensions
Material
(see "Technical Information") H4-housing
Weight 250 g
Specifications are subject to change without notice (30.04.03) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group
Titel: | Größe: | Typ: |
---|---|---|
PDF CATALOG CARLO GAVAZZI EN.pdf | 13 Mbytes | |
G34910000115 G34910000115 G34910000024_DATENBLATT_DE.pdf | 34 Kbytes |
Es gibt keine Produktbewertungenvor.
Wertung: | |
Name: | |
E-Mail : | |
Betreff: | |
Text: | |
Haben Sie dieses Produkt empfehlen zu kaufen? | |
Bewertung abgeben |
Alle Bewertungen wir von den Einzelteilen erhalten wir anbieten, sind real und verifiziert. Eine kleine Geste, aber sehr wertvoll. Also danke für die Minute, die Sie in, dass Sie uns Ihre Meinung und Bewertung von Produkten ausgeben, weil es mir hilft, weiter zu verbessern und noch mehr Servicequalität zu bieten.