PD60CNG08BPT CARLO GAVAZZI Parametri selezionati SISTEMA Retro-riflettente,trasparente CUSTODIA rettangolare..

Photoelectrics
Retro-reflective, Polarized, for Transparent Objects
Type PD 60 CNG..BP.. T
• Range 80 cm or 140 cm
• Modulated, visible red light, polarized
• High immunity to shiny surfaces
• Teach-in (keyboard or remote setup)
• Keyboard setup and multifunction LED
• Keyboard lock
• Microprocessor controlled and EEPROM parameter storage
• Operational voltage 10 - 30 V DC
• Output 100 mA, NPN and PNP
• Light or dark switching selectable
• Cable or M8 standard plug
• IP67 proctection
• Timer: ON-delay or OFF-delay
• cUL and CE approved
Product Description
Ordering Key
PD 60 CNG 14 BP M5 T
The PD60CNG is a retro-reflec- tive, polarized amplifier made specific for detecting trans- parent objects such as glass, PET etc. The sensor is micro- processor based and has built-in programmable func- tions such as Teach-In for fast sensing distance optimising, NO or NC output, time delay ON or OFF. The sensor output is a push-pull output that per- forms both a NPN and PNP output which are fully protected
against short-circuit, tran- sients and wrong polarity. The sensor housing is a strong 13 x 30 x 60 mm polycarbonate housing and ready for DIN-rail mounting.
The sensor works with one optical axis which gives a more precise detection. The sensor is designed for use in the material handling and packaging industry as well as the plastic and rubber indus- try.
Type
Housing style Housing size Housing material Not used
Transparent object detection
Sensing distance cm
Output type
Output configuration Connection type Teach-In mode
Type Selection
Housing Range Ordering no. Ordering no.
W x H x D Sn (ER 5060 reflector) NPN and PNP cable NPN and PNP plug
Make or break switching Make or break switching
13 x 30 x 60 mm 80 cm PD 60 CNG 08 BP T PD 60 CNG 08 BP M5 T
140 cm PD 60 CNG 14 BP T PD 60 CNG 14 BP M5 T
Note: Reflectors to be ordered separately
Specifications
Rated operating distance (Sn) Up to 80 cm or 140 cm with
ER 5060 reflector
Sensitivity
Teach-In Automatic threshold set-up
Manual fine tune Sensitivity increase or sen- sitivity decrease
Temperature drift < 0.4%/C°
Hysteresis (H)
Differential travel < 4%
Rated operational volt. (UB ) 10 to 30 VDC (ripple included)
Ripple (Urpp ) £ 10%
Output current
Continuous (Ie) 100 mA Short-time (I) 100 mA
No load supply current (Io) £ 45 mA
Voltage drop (Ud )
IL = 100 mA £ 2 VDC IL = 10 mA £ 1 VDC
Remote input
ON £ 1.4 VDC OFF ³ 3.0 VDC
Timer
Range programmable 0 to 5 s in 11 steps
First step 40 ms
Following step 500 ms
Protection Short-circuit, reverse pola- rity, transients
Light source GaAIAs, LED 660 nm Light type Red modulated Ambient light
Incandescent light 10’000 Lux
Sunlight 20’000 Lux
Specifications are subject to change without notice (21.02.02) 1