BDA-SSTRI1 CARLO GAVAZZI FUN selezionati parametri di temperatura di controllo MOU decentrata SUP alimentato..

Solid State Relay Output
BDA-SSTRI1
Small sized single solid state relay output
Load: 10 Watt
Powered by smart-house
Address coding by BGP-COD-BAT Low power consumption
GENERAL SPECIFICATIONS
Fail-safe mode In case of interruption of the smart-house connection, the channel will be forced into a specific optional status as
either active high or active low. Environment
Pollution degree 3 (IEC 60664)
Operation temperature -20° to +50°C (-4° to 122°F) Storage temperature -50° to +85°C (-58° to 185°F)
Humidity (non-condensing) 20 to 80% Housing
Material Noryl GFN 1, black
Dimensions (h x w x d) 26 x 39 x 17 mm
OUTPUT SPECIFICATIONS
Output 1 solid state relay (Triac) Maximum load 10 Watt / 50 mA Minimum load (recommended) 5 mA/230 VAC
Response time 1 pulse train
SUPPLY SPECIFICATIONS
Supplied by smart-house
Current consumption < 3 mA Power-on delay Typ. 2 s
WIRE CONNECTIONS
Bus: White = smart-house signal, D+ Black = smart-house negative, D-
Output: Brown = Solid state relay - Lin
Orange = Solid state relay - Lout
Bus wires: 2 x 0,75 mm2,
250 V isolation, single core, 150 mm
Output wires: 2 x 1,5 mm2 ,
250 V isolation, single core, 150 mm
INSULATION VOLTAGE
Live parts - smart-house 4 kVAC rms (6 mm) Enclosure - Live parts 2 kVAC rms (3 mm) Enclosure - smart-house 2 kVAC rms (3 mm)
MODE OF OPERATION
The smart-house decentral receiver has one NO solid state output. The module is especially designed for the use in building automation applications. It is further on developed to control heat valves in a heating system together with the temperature unit BFW-TEMDIS or BOW-TEMDIS. The compact size of the module makes it possible to fit it in a junction box or directly behind a power outlet.
The output address and fail-polarity may be coded by means of the code programmer BGP-COD-BAT, with GAP-THP-CAB cable.
Upon loss of smart-house carrier the output goes to the predefined fail-polarity.
TYPE SELECTION
Supply Ordering no.
Smart-house BDA-SSTRI1
ACCESSORIES
Programming cable
to BGP-COD-BAT GAP-TPH-CAB
WIRING DIAGRAM
DIMENSIONS
White Black
Orange Brown
DS + D -
Lout
Out 1
Lin
39
Specifications are subject to change without notice (20.09.2007) - A product of the CARLO GAVAZZI Group