G38000016230 CARLO GAVAZZI Parametri selezionati FUN Controllore MOU DIN-rail SUP CA IOS Contatto di ingress..

Master Channel Generator
Types G 3800 0016, G 3800 1016
Du line®
Fieldbus Installationbus
• Programmable channel generator
• Automatic data exchange between multiple networked Master
Generators, allowing systems with up to 4096 I/O points
• Option for built-in GSM Modem for monitoring and control via SMS
• User-friendly configuration via Windows 98/2000/NT/XP
software
• Real-time, timer and logic functions
• Analog set-point control and monitoring
• Light and Rollerblind control functions
• Alarm Monitoring
• Option for Radio controlled clock for high real time accuracy
• 2 x RS232 ports for configuration and Dupline data read/write
• 1 x RS485 port for networking of up to 32 Master Generators
• Modbus-RTU protocol
• Built-in software driver for external radio modem
• 4 digital inputs / 4 digital outputs on-board
• H8-housing for DIN-rail mounting (EN50022)
• AC or DC power supply
Product Description Ordering Key
G 3800 1016 230
Programmable channel gene- rator with built-in dedicated intelligent functions for light and roller blind control, alarm monitoring and analog set- point control. In addition to that, there is realtime-, timer- and logic- functions. Pro- gramming is easily performed through Windows-based con- figuration software. An optional built-in GSM modem can be used for monitoring and control of Dupline signals via SMS. Up to 32 Master generators can be networked
as slaves in a RS485 network using the Modbus protocol. The unit has 4 digital inputs and 4 digital outputs on- board, and it is possible to create links to other Dupline networks via external Radio Modem. The G3800X016 is different from the G3800X015 in that it has the capability to perform automatic data exchange with up to 32 other G3800X016’s in a RS485 net- work, enabling up to 4096
I/O-points in one system.
Type: Dupline® H8-housing GSM phone
Master channel generator
Supply
Type Selection
Supply Ordering no. Ordering no.
w. GSM telephone
115/230 VAC G 3800 0016 230 G 3800 1016 230
10-30 VDC G 3800 0016 800 G 3800 1016 800
Input/Output Specifications
Serial Port RS 232
COM 1 115 kBaud
COM 2 9600 Baud, adjustable
Data format 8 bit
COM 1, COM 2 No parity, 1 stop bit
9-pole female SUB-D Pin assignment TxD Pin 2
RxD Pin 3
GND Pin 5
Dielectric voltage
Com.port - Dupline® ≥ 2 kVAC (rms) Protocol Modbus-RTU
RS 485 Termination Pin 27 When in use, connect to pin 31
Fs-B Pin 28 When in use, connect to pin 30
Fs-A Pin 29 When in use, connect to pin 31
+ (B) Pin 30
- (A) Pin 31
Sequence time
32 channels / 128 channels 38.6 ms / 132.3 ms
Digital outputs 4 PNP transistors Function Programmable Output voltage VDD ≤ 35 VDC
Output current ≤ 100 mA Output voltage drop ≤ 2 V
Off-state leakage current ≤ 100 µA Short-circuit protection None Built-in protective diodes None Dielectric voltage
Output - Dupline® ≥ 4 kVAC (rms) Output - Input 200 V
Inductive loads External noise suppression required
Inputs
Digital 6 - 30 VDC
Voltage ON > 5.5 V OFF < 1.5 V Current ≤ 6 mA
Dielectric voltage
®
GND Pin 32
V+ Pin 33*)
Input - Dupline
GSM Modem
≥ 4 kVAC
Protocol Modbus-RTU
Dupline® Output Dupline® carrier
Output voltage 8.2 V Current < 130 mA Short-circuit protection Yes
Siemens cellular engine TC35
Dual Band EGSM900 and GSM1800
Output power Class 4 (2 W) EGSM900
Class 1 (1 W) GSM1800
Antenna connector FME
*) V+ and GND may be used as supply for digital I/O’s, if RS 485 is not used.
Specifications are subject to change without notice (01.09.2008) 1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group