BGT-TEST-SP CARLO GAVAZZI Parametri selezionati FUN Accessori MOU Portatile SUP Alimentato dal Bus Altro INF..

Test Unit
BGT-TEST-SP
Portable test unit
Monitoring of smart-house channel status
LCD-display
12-key tactile keyboard Supplied by smart-house Transmission latch
Dual-group reading
Analog BCD reading
Split I/O channel reading
PRODUCT SPECIFICATIONS
Output smart-house
Connection 3 mm Jack socket
Display 2 x 16 characters
Type LCD Height of dots 5 mm
Keyboard Tactile keys
No. of keys 12
Channel keys 1-8
Command keys « ↑ » « ↓ » (scroll up/down)
« MODE », « ENTER »
Cable 1 BGT-TEST-SP to smart-house
BGT-TEST-SP connector 3 mm Jack plug smart-house connector 2 mini grips Signal Red
Common Black
Cable 2 BGT-TEST-SP to Chip module
BGT-TEST-SP connector 3 mm Jack plug smart-house connector 1 6/6 modular plug
GENERAL SPECIFICATIONS
Environment
Degree of protection IP 40
Pollution degree 3 (IEC 60664)
Operating temperature 0° to +50°C (+32° to +122°F)
Storage temperature -20° to +60°C (-4° to +140°F)
Humidity (non-condensing) 20 to 80%
Mechanical resistance
Shock 15 G (11 ms) Vibration 2 G (6 to 55 Hz)
Dimensions (l x w x d) 145 x 90 x 28 mm
Material ABS, grey
Weight 250 g
SUPPLY SPECIFICATIONS
Power supply Supplied by smart-house
Reverse-polarity protection Yes
Rated operational current < 4.0 mA
MODE OF OPERATION
TYPE SELECTION
Supply Ordering no.
Supplied by smart-house BGT-TEST-SP
ADDITIONAL INFORMATION
128-channel portable transmit- ter/receiver unit supplied by smart-house. The BGT-TEST-SP can be used anywhere along the two wires to monitor and control the status of smart-house chan- nels. This unit is highly recom- mended for start-up and mainte- nance work on smart-house sys- tems.
The BGT-TEST-SP can operate in 6 different modes:
Digital 1 group Digital 2 groups Edit Tx-latch Analog BCD Split I/O
Sensor Calibration
Warning: Do not plug or unplug the Jack connector when the BGT- TEST-SP is connected to smart- house. This will cause a short-cir- cuit of the two wires.
Note: If the smart-house carrier is missing, the display will not turn on.
Scope of supply
1 x Test unit BGT-TEST-SP
1 x Cable 1 (mini grips) BGT-TEST-SP - GRIP - CAB
1 x Cable 2 BGT-TEST-SP - ASIC - CAB
WIRING DIAGRAM
D+ D-
Supplied by smart-house
Specifications are subject to change without notice (20.11.2007) - A product of the CARLO GAVAZZI Group