BH4-CTRLAB-230 CARLO GAVAZZI Parametri selezionati Altro INFO1 Estensione del bus INFO2 H4 (W72) INFO3 85-26..

smart-house Extension Bus Module
BH4-CTRLAB-230
Extension bus module for BH8-CTRLX-230
Channel generator output
Communication with BH8-CTRLX-230 via flat cable
AC power supply
H4-housing for DIN-rail mounting (EN50022)
INPUT/OUTPUT SPECIFICATIONS
smart-house Output smart-house bus
Output voltage 8.2 V
Current < 450 mA @ 25°C
< 300 mA @ 50°C Short-circuit protection Yes
Sequence time
32 in- and outputs 38.6 ms
128 in- and outputs 132.3 ms
SUPPLY SPECIFICATIONS
Power supply AC-Drive Overvoltage cat. III (IEC 60664) Rated operational voltage
through term. 21 & 22 85-264 VAC (IEC 60038) Frequency 47 to 63 Hz
Rated operational power Typ. 18 VA at max load
Power dissipation ≤ 7 W Rated impulse withstand
voltage 230 V 4 kV
Dielectric voltage
Supply - smart-house bus ≥ 3 kVAC (rms) Extension connector
- smart-house bus ≥ 3 kVAC (rms)
Supply - Extension connector ≥ 3 kVAC (rms)
GENERAL SPECIFICATIONS
Power ON delay < 1 s (+ controller power on
delay)
Indication for
Supply ON LED, green
BUS OK LED, yellow
Environment
Degree of protection IP 20
Pollution degree 3 (IEC 60664)
Operating temperature 0° to +50°C (+32° to +122°F)
Storage temperature -20° to +85°C (-4° to +185°F)
Humidity (non-condensing) 20 to 80% RH
Mechanical resistance
Shock 15 G (11 ms) Vibration 2 G (6 to 55 Hz)
Dimensions / Material
(see "Technical Information") H4-housing
Weight 200 g
TYPE SELECTION
Supply Ordering no.
115/230 VAC BH4-CTRLAB-230
ACCESSORIES
Set of flat cables BCAB-CTRLXA
(consists of 4 cables: 1 x 120 mm, 1 x 190 mm and 2 x 260 mm)
SCOPE OF SUPPLY DIMENSIONS (mm)
1 x smart-house Extension bus module BH4-CTRLAB-230
1 x manual
1 x 120 mm flat cable
1 x 190 mm flat cable
Specifications are subject to change without notice (28.03.2008) - A product of the CARLO GAVAZZI Group