OICP395220 nVent HOFFMAN HMI, 398x525x200

Matériau:

Corps: AlMg Si05; plaque arrière: AlMg; angles: AlSI 12.

Protection:

IP 65.

Finition:

Corps et plaque arrière: aluminium anodisé; angles: RAL 7016.

Instructions de montage:

Panneau avant OIFP non compris dans la livraison standard et doit être commandé séparément.

Livraison:

Corps, plaque arrière vissée, kit de montage de la plaque avant et accessoires de montage.

Feature:

Aluminium operator interface control panel, with a pre-machined hole pattern to mount onto a swing arm system, removable aluminium front plate accessory and a IP 65 protection degree.

Advantage:

Components can be installed easily because of the removable front panel (supplied as an accessory) and accessible because of the removable rear panel. The enclosure's pre-machined cut-out allows the panel to be quickly mounted to the swing arm system in the field. The pre-mounted enclosure side handles allow customers to manipulate the enclosure easily when performing operations. The aluminium body will dissipate a larger amount of heat, that has been generated from the installed components.

Benefit:

The enclosure reduces customer's labour cost and allows ergonomic use in the field, due to the pre-installed handles. The internal temperature of the control panel is kept low which may remove the requirement for ventilation.

Comment:

The aluminium front plate (OIFP), must be ordered separately.