SPD24901 CARLO GAVAZZI Paramètres sélectionnés MODELE rail DIN TENSION D'ENTREE VCA 90 264V PUISSANCE DE SOR..

Switching Power Supply
Type SPD 90W
DIN rail mounting
• Installation on DIN Rail 7.5 or 15mm
• Short circuit protection
• PFC standard
• High efficiency
• Power ready output
• LED indicator for DC power ON
• LED indicator for DC low
• Model specific to meet UL 1310 class 2
• UL, cUL listed and TUV/CE approved
Product Description
Ordering Key SP D 24 90 1 B
The Switching power supplies SPD series are specially designed to be used in all automation application where the installation is on a DIN rail
Approvals
and compact dimensions and performance are a must.
This version is specifically developed to meet UL1310 class 2.
Model
Mounting ( D = Din rail ) Output voltage
Output power Input type Optional features
Input type: 1= single phase
Rheinland
Product Safety
Optional Features
Description Code
Standard screw terminal Nil
Plug-in connectors B
Output performances
Rated output
Output
DC ON LED (VDC)
DC LO LED (VDC)
Model
Voltage
Power
Output
Voltage Trim Range Thereshold at startup Thereshold after startup Typical
(VDC)
(W)
Current (A)
Min. VDC Max. VDC Min. Max. Min. Max.
Efficiency
SPD2490 24 92 3.8 22.5 24.5 17.6 19.4 17.0 19.4 85%
Output data
Output voltage accuracy -0 +1% max (factory adjusted)
Line regulation ± 0.5%
Load regulation
Non parallel model ± 1% Parallel model ± 5%
Temp. coefficient ± 0.3% / °C
Transient recovery time 300µs
Ripple and noise 50mVpp
Hold up Time Vi = 115VAC 25ms
Hold up time Vi = 230VAC 30ms
Minimum load 0%
Parallel Operation No
Input data
Rated input voltage 115/230 autoselect
Voltage range
AC in, 115 90 - 132VAC AC in, 230 186 - 264VAC DC in 210 - 370VDC
Rated input current 2.0 / 0.8A Frequency range 47- 63 Hz Inrush current
Vi= 115VAC 24A
Vi= 230VAC 48A
P.F.C. 0.7
1 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. - 1410