CPTDINAV61LV3AX CARLO GAVAZZI Paramètres sélectionnés FONCTION Transducteurs MONTAGE rail DIN ALIMENTATION 1..

Energy Management
Compact Power Transducer
Type CPT-DIN “Advanced version”
• One digital output and RS485 communication port (2 wires only)
• 16 freely configurable alarms with OR/AND logic linkable
to up to 2 digital outputs
• RS422/485/RS232 communication port (MODBUS- RTU), iFIX SCADA compatibility
Product Description
• Class 1 (kWh), Class 2 (kvarh)
• Accuracy ±0.5 F.S. (current/voltage)
• Compact power transducer
• Instantaneous variables data format: 4 DGT
• Energies data format: 8+1 DGT
• System variables and phase measurements: VLL, VLN, A, Amax, An, Admd, Admd max, VA, VAdmd, VAdmd max, W, Wdmd, Wdmd max, WL1, WL2, WL3 max, var, PF, PFL1, PFL2, PFL3 min, Hz, ASY
• Four quadrant power measurement
• Energy measurements: total and partial kWh and kvarh
(according to EN62053-21 and EN62053-23)
• Hour counter (5+2 DGT)
• TRMS meas. of distorted sine waves (voltages/currents)
• Universal power supply: 90 to 260 VAC/DC, 18 to 60 VAC/DC
• Dimensions: 45x83.5x98.5mm
• Voltage asymmetry, phase sequence, phase loss control
• Up to 3 analogue outputs (20mA or 10VDC)
• 2 digital outputs
How to order CPT-DIN AV5 3 H A3 AX
3-phase compact power transducer. Particularly rec- ommended for the measure- ment of the main electrical variables also on board of machines.
Housing for DIN-rail mount-
ing, with up to 3 analogue outputs, or RS485 communi- cation port or alarm outputs or “Dupline” bus. Parameters programmable by means of CptASoft.
Model Range code System
Power supply Outputs Option
How to order
CptASoft-kit
Type Selection
CptASoft: software to program the working parameters of the transducer and to read the energies and the instanta- neous variables. The kit includes the communication cable.
Range codes
AV5: 400/690VL-L/1/5(6)AAC VL-N: 185 V to 460 V
VL-L: 320 V to 800 V
AV6: 120/208VL-L/1/5(6)AAC VL-N: 45 V to 145 V
VL-L: 78 V to 250 V Phase current: 0.01A to 6A
Neutral current: 0.05A to 6A
Input specifications
System
3 : 1-2-3-phase, balanced/ unbalanced load, with or without neutral
1 : 1-3-phase, balanced load (*)
(*) Note: the 3-phase bal- anced load measurement requires the connection of the neutral according to fig.
15 and 16 in the final part of this document.
Outputs
R2: 2-relay outputs
O2: 2-open collector outputs
RS: 1-reed relay output + RS485 port (2-wire)
A1: 1-analogue output:
0/4 to 20mA DC
A3: 3-analogue outputs:
0/4 to 20mA DC
V1: 1-analogue output:
0 to 10V DC
V3: 3-analogue outputs:
0 to 10V DC
S1: RS485/RS422 port
S2: RS232 port
DB: Dupline bus
Options
AX: advanced functions
Power supply L: 18 to 60 VAC/VDC
H: 90 to 260 VAC/VDC
Rated inputs System type: 3
Current 3 (internal current transformers) Voltage 4
System type: 1
Current 1 (internal CT) Voltage 2
Accuracy (RS485) Imax: 6A, Vmax: 400VLN (690VLL), (@25°C ±5°C, R.H. ≤60%) In: 5A, Vn: 230VLN (400VLL)
CT: 1, VT (PT): 1
Range accuracy: 0.02In to 0.05In
Current ±(0.5%FS) or ±(1%RDG+2DGT)
Neutral current ±(2%RDG+3DGT) Phase-phase voltage ±(0.5%RDG+2DGT) Phase-neutral voltage ±(0.5%RDG+2DGT)
Active and Apparent power, ±(1.5%RDG+3DGT) Reactive power ±(3%RDG+3DGT)
Range accuracy: 0.05In to Imax
Current ±(0.5%RDG+2DGT) Neutral current ±(1%RDG+3DGT) Phase-phase voltage ±(0.5%RDG+2DGT)
Phase-neutral voltage ±(0.5%RDG+2DGT) Active and Apparent power, ±(1%RDG+3DGT)
Specifications are subject to change without notice CPT-DIN A DS ENG 010408 1